You may also like
Eaton B-Line series beam clamps, Beam clamp, 1-5/8", 1" beam thickness, 5-7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Flange Width:
- 5.875 in
- Beam Thickness:
- 1 in
- Certifications:
- cULus Listed
- Product Height:
- 5 in
- Product Length Depth:
- 4 in
- Product Weight:
- 1.22 lb
- Product Width:
- 3 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
B-LINE B760-22A-J4ZN – Frequently Asked Questions
1) What size beam flange will the B-Line B760-22A-J4ZN beam clamp fit?
The B760-22A-J4ZN is sized for a beam flange up to 5-7/8 inches wide with a flange thickness up to 1 inch. Measure the actual flange on your steel, not the nominal beam size, since the flange edge taper on wide-flange shapes puts the usable thickness at the clamping point below the published web numbers. If your flange runs wider than 5-7/8 inches, this clamp will not close on it and you need a larger-opening clamp or a beam attachment plate.
2) Can I use an electro-plated zinc beam clamp outdoors or in a parking garage?
Electro-plated zinc is a light indoor finish. It is fine for conditioned interiors, ceiling plenums, and dry mechanical rooms, but it is not the finish to hang outdoors, in a wash-down area, in a pool room, or in an open parking structure exposed to road salt. For those conditions, step up to a hot-dip galvanized or stainless beam clamp in the same 1-5/8 inch channel size.
3) Do I need to weld or drill the steel to install this beam clamp?
No drilling, no welding, no hot work permit. A beam clamp like the B760-22A-J4ZN grips the flange mechanically, which is why it is the standard attachment in existing buildings where the structural engineer will not allow holes in the steel and in occupied spaces where welding is off the table. You mount it to the flange and hang your 1-5/8 inch channel from it.
4) What else do I need to order to hang conduit from this beam clamp?
The clamp is the attachment to the steel only. To finish the hang you still need the 1-5/8 inch strut channel itself, plus channel nuts and hardware, and then whatever holds the raceway to the channel, conduit clamps or cable tray hold-downs. On a threaded rod drop you will also need the rod, nuts, and washers. Order the clamps per attachment point, not per run.
5) What is the exact part number to order for this Eaton B-Line beam clamp?
Order it as B760-22A-J4ZN, an Eaton B-Line series beam clamp. The B760 is the clamp series, and the J4ZN suffix identifies the electro-plated zinc finish, so quoting the full string keeps you from being shipped a different finish on the same body.
How fast can I get the B-LINE B760-22A-J4ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B760-22A-J4ZN come with a warranty?
Absolutely. The B-LINE B760-22A-J4ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B760-22A-J4ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B760-22A-J4ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.