You may also like
B-Line Eaton series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 6", Used with series eye rods, Trus joist beam clamp, 1/
Model: BLN-FIG 130-6-EG
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 6", Used with (B3210) series eye rods, Trus joist beam clamp, 1/2"-13 thread/rod size, Electro galvanized
B-LINE
$88.36
$52.09
B-Line Eaton series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 1", Used with series eye rods, Trus joist beam clamp, 3/
Model: BLN-FIG 130-1-EG
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 1", Used with (B3210) series eye rods, Trus joist beam clamp, 3/8"-16 thread/rod size, Electro galvanized
B-LINE
$79.59
$40.50
B-Line Eaton series beam clamps, 1200 lb, Malleable iron, Used with , support, beam clamp, Beam clamp with gusset assembly, 7/8" beam thickness, 7-5/
Model: BLN-B602CGRN
Eaton B-Line series beam clamps, 1200 lb, Malleable iron, Used with (B451), (B213) support,(B213) beam clamp, Beam clamp with gusset assembly, 7/8" beam thickness, 7-5/8" flange width, DURA GREEN
B-LINE
$51,112.16
$51,062.16
B-Line Eaton series beam clamps, 1200 lb, Malleable iron, Used with , support, beam clamp, Beam clamp with gusset assembly, 7/8" beam thickness, 5-3/
Model: BLN-B602BGRN
Eaton B-Line series beam clamps, 1200 lb, Malleable iron, Used with (B451), (B213) support,(B213) beam clamp, Beam clamp with gusset assembly, 7/8" beam thickness, 5-3/4" flange width, DURA GREEN
B-LINE
$48,857.37
$48,807.37
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 5", Used with (B3210) series eye rods, Trus joist beam clamp, 1/2"-13 thread/rod size, Electro galvanized
Manufacturer Resources
Product Specs
- Application:
- Designed for attachment to trus joist beams
- Certifications:
- UL Listed
- Load Capacity:
- 500 lb
- Product Height:
- 1.75 in
- Product Length Depth:
- 2 in
- Product Weight:
- .86 lb
- Product Width:
- 3.5 in
- Special Features:
- Used with (B3210) series eye rods
- Thread Rod Size:
- 1/2"-13
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Trus joist beam clamp
- Product Size:
- 5 inch
- Product Details:
- Trus joist beam clamp
- Product Material:
- Steel
- Product Length:
- 2 in
B-LINE FIG 130-5-EG – Frequently Asked Questions
1) How much weight can the B-Line FIG 130 trus joist clamp hold?
The FIG 130-5-EG is rated for a 500 lb load. That covers typical conduit runs, small pipe, and hanger drops off a wood I-joist. It is UL Listed. Anything heavier than 500 lb per support point needs a higher-capacity attachment or more clamps spread across the run.
2) Can I use this beam clamp on a steel I-beam flange?
No. The FIG 130 is built for attachment to trus joist beams, meaning engineered wood I-joists, not structural steel flanges. For a steel beam you want a purpose-built steel flange clamp, typically a C-clamp or center-load beam clamp sized to your flange thickness.
3) What does the 5 inch size on the FIG 130-5-EG refer to, and will it fit my joist?
The 5 inch designation is the joist depth the clamp is built to straddle. B-Line publishes the clamp itself at 3.5 in wide, 2 in deep, and 1.75 in high, weighing .86 lb. Trus joists come in several depths, so measure the web depth of the joist you're hanging from and match the clamp size to it.
4) What else do I need to order to hang conduit from this clamp?
The clamp is the attachment point only. B-Line pairs it with the B3210 series eye rods, which thread in at 1/2 inch-13. From there you add your rod, hanger, or strap for the conduit or pipe itself. Plan on ordering the eye rod and the hanger separately.
5) Is the electro galvanized finish on this clamp OK for outdoor or damp locations?
Electro galvanized steel is a thin zinc coating meant for dry indoor use. It's fine above a ceiling or in a conditioned space, which is where trus joists normally live anyway. For exterior, wet, or corrosive areas, specify a hot dip galvanized or stainless attachment instead.
6) Is the B-Line FIG 130 clamp UL Listed for electrical support?
Yes, the FIG 130-5-EG carries a UL Listing, which is what an inspector or a spec-driven institutional job usually wants to see on a conduit support. It's rated at 500 lb.
7) What part number do I order for the 5 inch electro galvanized trus joist clamp?
The manufacturer part number is FIG 130-5-EG from Eaton's B-Line series. The 130 is the trus joist clamp figure, the 5 is the joist depth, and EG is the electro galvanized finish. Other joist depths carry a different middle number.
How fast can I get the B-LINE FIG 130-5-EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 130-5-EG come with a warranty?
Absolutely. The B-LINE FIG 130-5-EG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 130-5-EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 130-5-EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.