You may also like
B-Line Eaton series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 5", Used with series eye rods, Trus joist beam clamp, 1/
Model: BLN-FIG 130-5-EG
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 5", Used with (B3210) series eye rods, Trus joist beam clamp, 1/2"-13 thread/rod size, Electro galvanized
B-LINE
$88.36
$52.09
B-Line Eaton series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 1", Used with series eye rods, Trus joist beam clamp, 3/
Model: BLN-FIG 130-1-EG
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 1", Used with (B3210) series eye rods, Trus joist beam clamp, 3/8"-16 thread/rod size, Electro galvanized
B-LINE
$79.59
$40.50
B-Line Eaton series beam clamps, 1200 lb, Malleable iron, Used with , support, beam clamp, Beam clamp with gusset assembly, 1/2"-13 thread/rod size,
Model: BLN-B602AGRN
Eaton B-Line series beam clamps, 1200 lb, Malleable iron, Used with (B451), (B213) support,(B213) beam clamp, Beam clamp with gusset assembly, 1/2"-13 thread/rod size, 1/2" screw size, 7/8" beam...
B-LINE
$46,703.36
$46,653.36
B-Line Eaton series beam clamps, Attaches hanger rod to bottom flange of beam., Malleable iron, Malleable iron beam clamp with extension, Plain
Model: BLN-B3054PLN
Eaton B-Line series beam clamps, Attaches hanger rod to bottom flange of beam., Malleable iron, Malleable iron beam clamp with extension, Plain
B-LINE
$186.89
$185.17
Eaton B-Line series beam clamps, Designed for attachment to trus joist beams, 500 lb, Steel, 6", Used with (B3210) series eye rods, Trus joist beam clamp, 1/2"-13 thread/rod size, Electro galvanized
Manufacturer Resources
Product Specs
- Application:
- Designed for attachment to trus joist beams
- Certifications:
- UL Listed
- Load Capacity:
- 500 lb
- Product Height:
- 2.5 in
- Product Length Depth:
- 2 in
- Product Weight:
- 1.01 lb
- Product Width:
- 3.875 in
- Special Features:
- Used with (B3210) series eye rods
- Thread Rod Size:
- 1/2"-13
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Trus joist beam clamp
- Product Size:
- 6 inch
- Product Details:
- Trus joist beam clamp
- Product Material:
- Steel
B-LINE FIG 130-6-EG – Frequently Asked Questions
1) Will the B-Line FIG 130-6-EG beam clamp work on a wood trus joist, or is it for steel beams?
The FIG 130-6-EG is built specifically for attachment to trus joist beams, not for flange-gripping on structural steel. If you are hanging from a steel I-beam flange, this is the wrong style of clamp and you want a steel flange beam clamp instead.
2) How much weight can a single B-Line trus joist beam clamp carry?
Rated 500 lb per clamp. That covers most single-pipe, conduit, or cable tray drops, but spread the load across additional clamps if your hanger point exceeds it. The clamp itself is steel and weighs 1.01 lb, so it adds almost nothing to the hung load.
3) Do I need to order anything else to hang from the FIG 130 trus joist clamp?
The clamp is the attachment point only. It is used with B3210 series eye rods, and you supply the 1/2 inch-13 rod or eye rod plus whatever pipe clamp, strut, or conduit hanger terminates the drop.
4) Is the B-Line FIG 130-6-EG beam clamp UL Listed?
Yes, it carries a UL Listed certification, which is what inspectors typically look for on electrical support hardware in commercial and institutional work.
5) What is the 6 inch dimension on the B-Line FIG 130-6-EG, and how much space does the clamp take up?
The 6 inch is the clamp size designation for the joist it straddles. The body itself measures 2.5 in height, 2 in length/depth and 3.875 in width, so allow roughly four inches across the joist face when you are laying out closely spaced drops.
6) Is the electro galvanized finish on this B-Line beam clamp suitable for outdoor or damp locations?
Electro galvanized is a light zinc coating intended for dry indoor use, which is where trus joists normally are. For exterior, wet, or corrosive environments, specify a hot dip galvanized or stainless support instead.
7) What is the manufacturer part number for the B-Line 6 inch electro galvanized trus joist clamp?
FIG 130-6-EG from Eaton B-Line. The 130 is the trus joist clamp figure, the 6 is the size, and EG denotes the electro galvanized finish.
How fast can I get the B-LINE FIG 130-6-EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 130-6-EG come with a warranty?
Absolutely. The B-LINE FIG 130-6-EG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 130-6-EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 130-6-EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.