You may also like
B-Line Eaton series beam clamps, Vertical adjustment provided in the clamp, Steel, Steel beam clamp, 1"-8 thread/rod size, Plain finish
Model: BLN-B3055-1X10PLN
Eaton B-Line series beam clamps, Vertical adjustment provided in the clamp, Steel, Steel beam clamp, 1"-8 thread/rod size, Plain finish
B-LINE
$2,586.60
B-Line Eaton series beam clamps, Vertical adjustment provided in the clamp, Steel beam clamp, 1"-8 thread/rod size, Plain steel finish
Model: BLN-B3055-1X4PLN
Eaton B-Line series beam clamps, Vertical adjustment provided in the clamp, Steel beam clamp, 1"-8 thread/rod size, Plain steel finish
B-LINE
$1,950.09
B-Line Eaton series beam clamps, Vertical adjustment provided in the clamp, 4300 load capacity Steel, Steel beam clamp, 1"-8 thread/rod size, Plain st
Model: BLN-B3055-1X5PLN
Eaton B-Line series beam clamps, Vertical adjustment provided in the clamp, 4300 load capacity Steel, Steel beam clamp, 1"-8 thread/rod size, Plain steel finish
B-LINE
$1,988.66
Eaton B-Line series beam clamps, Vertical adjustment provided in the clamp, Steel, Steel beam clamp, 1"-8 thread/rod size, Plain
Manufacturer Resources
Product Specs
- Certifications:
- cULus Listed
- Load Capacity:
- 4300 lb
- Product Height:
- 5.5 in
- Product Length Depth:
- 5.5 in
- Product Weight:
- 9.05 lb
- Product Width:
- 8 in
- Thread Rod Size:
- 1"-8
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Steel beam clamp
- Product Details:
- Steel beam clamp
- Product Material:
- Steel
- Product Length:
- 5.5 in
- Application:
- Vertical adjustment provided in clamp
B-LINE B3055-1X8PLN – Frequently Asked Questions
1) What rod size does the B-Line B3055-1X8PLN beam clamp take?
It is threaded for 1 inch-8 rod. That is the clamp's rod/thread size, so 1"-8 all-thread is what drops from it. If your hanger run uses 1/2"-13 or 5/8"-11 rod, this is not the clamp for that opening.
2) How much load will this B-Line steel beam clamp carry?
Rated at 4300 lb. That is a heavy-duty figure for a single rod hanger point, which is consistent with the 1"-8 rod it accepts. Confirm your engineer's design load and the beam flange it is biting on before you hang to the full rating.
3) Is the B3055 beam clamp listed for use in electrical hanger systems?
It is cULus Listed, so it carries both US and Canadian listing coverage. That matters to an inspector on a commercial or institutional job where hanger components on conduit and cable tray support have to be listed.
4) Do I still need a separate threaded coupling or nut to adjust rod height with this clamp?
No. Vertical adjustment is built into the clamp body, so you set the drop at the clamp rather than adding a coupling or turnbuckle to the rod. It shortens the parts list on a long hanger run.
5) How much room do I need above the ceiling for the B-Line B3055-1X8PLN?
The clamp measures 5.5 x 5.5 x 8 inches and weighs 9.05 lb. In a tight plenum or against a deck, work that 8 inch dimension into your clearance check, and plan on a two-hand lift at height since it is not a light part.
6) Is the plain finish on this beam clamp okay for outdoor or wet locations?
Plain steel, uncoated. Keep it to dry interior work. For exterior, parking structures, wash-down areas, or anywhere condensation collects, specify a galvanized or plated version of the beam clamp instead, because bare steel will rust at the beam contact point.
7) What is the exact part number to order this B-Line beam clamp?
Eaton B-Line part number B3055-1X8PLN. The B3055 is the clamp series, 1X8 is the 1"-8 rod size, and PLN is the plain steel finish. Same number for a distributor cross-reference.
8) Can I use the B3055 clamp to hang conduit or cable tray without welding to the structure?
That is the point of it. The steel beam clamp bites the beam flange mechanically and gives you a 1"-8 rod drop, so you get a support point with no welding and no drilling into structural steel, which is usually what the structural engineer prefers.
How fast can I get the B-LINE B3055-1X8PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3055-1X8PLN come with a warranty?
Absolutely. The B-LINE B3055-1X8PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3055-1X8PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3055-1X8PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.