B-Line Eaton series cable supp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$227.96
B-Line Eaton series cable support fasteners, Conduit and cable, Flange, 0.05lbs, Flexible conduit/cable fasteners, .13" Min, .25" Max mount size, .29"

B-Line Eaton series cable support fasteners, Conduit and cable, Flange, 0.05lbs, Flexible conduit/cable fasteners, .13" Min, .25" Max mount size, .29"

(No reviews yet) Write a Review

Model: BXM-89
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$227.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series cable support fasteners, Conduit and cable, Flange, 0.05lbs, Flexible conduit/cable fasteners, .13" Min, .25" Max mount size, .29" Min, 0.375" Max cable diameter, 200 lbs load capacity, Zinc plated

Manufacturer Resources

Product Specs

Application:
Secures cable along flanges
Cable Diameter Max:
.375 in
Cable Diameter Min:
.29 in
Certifications:
CE
Mounting Dimensions Max:
0.25
Mounting Dimensions Min:
0.13
Mounting Method:
Flange
Product Category:
Conduit and cable
Product Height:
1 in
Product Length Depth:
1 in
Product Weight:
.005 lb
Product Width:
1 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
Flexible conduit/cable fasteners
Product Details:
Flexible conduit/cable fasteners

B-LINE BXM-89 – Frequently Asked Questions

1) What thickness of flange does this B-Line cable clip snap onto?
It grips flange edges from 0.13 inch to 0.25 inch thick. That covers typical beam flanges, strut edges, and sheet steel in that range. On anything thinner the clip will not hold tension, and it will not spread onto a flange over 1/4 inch.
2) Do I need to drill or weld to install the BXM-89 cable fastener?
No drilling, no welding, no anchors. The BXM-89 is a flange-mount clip that pushes onto the edge of a beam flange or similar steel edge and holds the cable against it. That is the whole install, which is why electricians use these for long horizontal cable runs where drilling every support would eat the schedule.
3) How much load will the B-Line BXM-89 flange clip hold?
Rated at 200 lbs load capacity, and the clip itself weighs .005 lb. In practice the limiting factor on a cable run is spacing, not the single clip, but the 200 lb figure is what Eaton publishes for this fastener.
4) Is the BXM-89 fastener corrosion protected for use in a mechanical room or parking structure?
The fastener is zinc plated, which is standard protection for dry and normally dry interior environments such as mechanical rooms, ceiling plenums, and back-of-house runs. For continuously wet or corrosive exposure, a zinc plated finish is not the right specification.
5) How much space does the BXM-89 clip take up on the flange?
Its envelope is 1 inch in height, width, and length/depth, so it stays tight to the steel and clears most ceiling and structural congestion. Worth checking against your fireproofing thickness if the beam is sprayed.
6) Does the Eaton B-Line BXM-89 carry any certification for a spec submittal?
It carries the CE mark. That is the certification held on record for this fastener, and it is the one to reference on a submittal for the BXM-89.
How fast can I get the B-LINE BXM-89 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BXM-89 come with a warranty?
Absolutely. The B-LINE BXM-89 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BXM-89?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BXM-89 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!