Eaton B-Line series conduit support fasteners, Beams, 1" Height, 1" Length, 1" Width, 0.105lbs, Conduit size: 1.25" EMT/Rigid, Conduit to beam fasteners, .5" Max mount size, 25 lbs load capacity
Manufacturer Resources
Product Specs
- Application:
- Supports conduit and electrical boxes
- Certifications:
- UL/CUL listed
- Load Capacity:
- 25 lbs
- Mounting Dimensions Max:
- 0.5
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .105 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit to beam fasteners
- Product Size:
- Conduit size: 1.25 inch EMT/Rigid
- Product Details:
- Conduit to beam fasteners
B-LINE BG-24-C1 – Frequently Asked Questions
1) What size conduit does the B-Line BG-24-C1 beam clamp hold?
The BG-24-C1 is sized for 1-1/4 inch EMT or rigid conduit. It is a conduit-to-beam fastener, so the conduit snaps into the clip side while the clamp side grips the beam flange. Run a different size conduit and you need a different clip in the series, not this one.
2) How thick a beam flange will the BG-24-C1 clamp onto?
Maximum mounting thickness is 0.5 inch, so it fits flanges, angle iron, and purlin edges up to 1/2 inch thick. Anything heavier than a half-inch flange, common on larger structural beams, is outside this clamp's range and you need a heavier beam clamp instead.
3) How much weight can one of these B-Line beam clamps carry?
Rated load capacity is 25 lbs per fastener. That covers a run of 1-1/4 inch EMT with normal support spacing, but it is a per-clamp figure, so space your supports so no single clip is carrying more than 25 lbs of conduit and fill.
4) Do I need any anchors, screws, or drilling to install the BG-24-C1?
No drilling and no fasteners into the steel. It is a clamp-on fastener that grips a beam flange up to 1/2 inch thick, so the beam stays undrilled and unwelded, which is usually what the structural spec requires. One clamp handles one conduit; order by the count of support points on the run.
5) Is the B-Line BG-24-C1 conduit clamp UL listed for inspected electrical work?
Yes, it carries a UL/CUL listing, which is what an inspector or a spec-driven institutional job looks for on conduit support hardware. That listing covers both US and Canadian use.
6) Can I use this beam fastener to hang an electrical box, or only conduit?
Both. The BG-24-C1 is intended for supporting conduit and electrical boxes off structural steel, within its 25 lb load rating. The conduit side is sized for 1-1/4 inch EMT or rigid.
How fast can I get the B-LINE BG-24-C1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BG-24-C1 come with a warranty?
Absolutely. The B-LINE BG-24-C1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BG-24-C1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BG-24-C1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.