Eaton B-Line series conduit support fasteners, Beams, 1" Height, 1" Length, 1" Width, 0.13lbs, Conduit size: 1.25" EMT/Rigid, Conduit to beam fasteners, .5" Max mount size, 25 lbs load capacity
Manufacturer Resources
Product Specs
- Application:
- Supports conduit and electrical boxes
- Certifications:
- UL/CUL listed
- Load Capacity:
- 25 lbs
- Mounting Dimensions Max:
- 0.5
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .13 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit to beam fasteners
- Product Size:
- Conduit size: 1.25 inch EMT/Rigid
- Product Details:
- Conduit to beam fasteners
B-LINE BG-24-C2 – Frequently Asked Questions
1) What size conduit does the B-Line BG-24-C2 beam clamp hold?
The BG-24-C2 is sized for 1-1/4 inch EMT or rigid conduit. It is a one-piece conduit-to-beam fastener, so the conduit seat is fixed at that trade size; a different conduit diameter needs a different clamp from the series.
2) What thickness of beam flange will this B-Line conduit clamp fit over?
Maximum mounting thickness is 0.5 inch, so the BG-24-C2 clips onto beam flanges, purlins or angle up to 1/2 inch thick. Anything thicker than that and the clamp will not seat on the flange.
3) How much weight can a BG-24-C2 beam fastener carry?
Rated load capacity is 25 lbs per fastener. That covers a run of 1-1/4 inch EMT with normal spacing, or a light electrical box, but the spacing of your supports has to keep each clamp inside that 25 lb figure. For heavier loads or threaded rod hung trapeze runs, step up to a rod-type beam clamp instead.
4) Is this B-Line beam clamp UL listed for electrical work?
Yes, the BG-24-C2 conduit-to-beam fastener is UL/CUL listed, which is what inspectors look for when conduit supports are attached to building steel on commercial jobs.
5) Can I use this clamp to hang an electrical box off a steel beam, or is it only for conduit?
Both. The fastener is listed for supporting conduit and electrical boxes, as long as the total hung weight stays within the 25 lb rating and the beam flange is 1/2 inch thick or less.
6) Is BG-24-C2 the full part number to order for 1-1/4 inch conduit?
Yes. The Eaton B-Line part number is BG-24-C2, and that single model covers the 1-1/4 inch EMT/rigid size. There are no finish or size options to specify on it.
How fast can I get the B-LINE BG-24-C2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BG-24-C2 come with a warranty?
Absolutely. The B-LINE BG-24-C2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BG-24-C2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BG-24-C2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.