Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.075lbs, Conduit size: 0.5" EMT, 0.5" IMC, Rigid, Push-type conduit to beam fasteners, .56" Min mount size, .75" Max mount size
Manufacturer Resources
Product Specs
- Application:
- Quickly attaches conduit to beams
- Certifications:
- UL/CUL listed
- Mounting Dimensions Max:
- 0.75
- Mounting Dimensions Min:
- 0.56
- Mounting Method:
- Flange
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .075 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Push-type conduit to beam fasteners
- Product Size:
- Conduit size: 0.5 inch EMT, 0.5 inch IMC, Rigid
- Product Details:
- Push-type conduit to beam fasteners
B-LINE BP-12-E-9-12 – Frequently Asked Questions
1) What beam flange thickness will this B-Line push-on conduit fastener fit?
It clips onto flange edges from 0.56 inch up to 0.75 inch thick. Thinner flanges, like light-gauge bar joist angle, will not hold it securely, and anything over 3/4 inch will not seat.
2) Do I need bolts or screws to install the BP-12-E-9-12?
No fasteners or drilling. It is a push-type clamp that mounts to the beam flange by hand, then the conduit pushes into the clip. That is the whole install, which is why electricians use these for long horizontal runs under steel.
3) Is this B-Line conduit beam clip UL listed for an inspected commercial job?
Yes, the BP series beam fastener is UL/CUL listed, which covers both US and Canadian inspection on commercial and institutional electrical work.
4) Can I use a push-on beam clip instead of a conduit strap and threaded rod?
For conduit running along or across a steel beam flange, the push-on clip is the faster method: no rod, no strut, no anchors. Use strap and rod when the conduit has to drop below the structure, when there is no exposed flange edge between 0.56 and 0.75 inch to clip to, or when the run is larger than 1/2 inch conduit.
5) Will this clip work on 1/2 inch rigid as well as EMT, or do I need two different parts?
One part covers all three. The BP-12-E-9-12 is rated for 1/2 inch EMT, 1/2 inch IMC, and rigid, so a crew running mixed raceway on the same steel only has to stock the one fastener.
How fast can I get the B-LINE BP-12-E-9-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BP-12-E-9-12 come with a warranty?
Absolutely. The B-LINE BP-12-E-9-12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BP-12-E-9-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BP-12-E-9-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.