Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.082lbs, Conduit size: 0.5" EMT, 0.5" IMC, Rigid, Push-type conduit to beam fasteners, .13" Min mount size, .25" Max mount size
Manufacturer Resources
Product Specs
- Application:
- Quickly attaches conduit to beams
- Certifications:
- UL/CUL listed
- Mounting Dimensions Max:
- 0.25
- Mounting Dimensions Min:
- 0.13
- Mounting Method:
- Flange
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .082 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Push-type conduit to beam fasteners
- Product Size:
- Conduit size: 0.5 inch EMT, 0.5 inch IMC, Rigid
- Product Details:
- Push-type conduit to beam fasteners
B-LINE BP-12-E-2-4 – Frequently Asked Questions
1) What conduit size does the B-Line BP-12-E-2-4 beam clamp hold?
The B-Line BP-12-E-2-4 push-type fastener takes 1/2 inch conduit, and it is rated for 1/2 inch EMT, 1/2 inch IMC, and 1/2 inch rigid. Run anything larger than 1/2 inch and you need a different size clamp.
2) What beam flange thickness will this B-Line push-on conduit fastener clip onto?
It clips to flange edges from 0.13 inch up to 0.25 inch thick. That covers light bar joist and thin flange steel, but it will not go over a heavier beam flange past a quarter inch, so measure the flange edge before you order a box of them.
3) Do I need to drill or weld to mount conduit to a beam with this clamp?
No drilling, no welding, no bolts. The BP-12-E-2-4 is a push-type fastener with a flange mounting method, so it snaps over the beam flange and the conduit pushes into the clip. That's what makes it fast on overhead runs where you're working off a lift.
4) Is this B-Line conduit beam clip UL listed for an inspected commercial job?
Yes, the BP-12-E-2-4 is UL and cUL listed, so it carries the listing for both US and Canadian work.
5) Will this B-Line clip work for 1/2 inch flexible conduit or MC cable?
It's specified for 1/2 inch EMT, IMC, and rigid conduit only. For flex or MC you want a clip rated for that cable type instead, since the clip geometry is sized to the outside diameter of rigid raceway.
How fast can I get the B-LINE BP-12-E-2-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BP-12-E-2-4 come with a warranty?
Absolutely. The B-LINE BP-12-E-2-4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BP-12-E-2-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BP-12-E-2-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.