Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, 72" hanger spacing, Steel, Side mounting, 1" max pipe size, “Stand-off” hanger and restrainer for CPVC plastic pipe
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Hanger Spacing:
- 72 in
- Mounting Method:
- Side mount
- Pipe Size Max:
- 1 in
- Product Height:
- 3.3125 in
- Product Length Depth:
- .875 in
- Product Weight:
- .21 lb
- Product Width:
- 3.5 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Hangers
- Product Type:
- Stand-off hanger restrainer for CPVC plastic pipe
- Product Details:
- Stand-off hanger restrainer for CPVC plastic pipe
- Product Material:
- Steel
- Product Length:
- 0.875 in
B-LINE FIG 28-1-PGL – Frequently Asked Questions
1) What size CPVC pipe does the B-Line FIG 28-1-PGL stand-off hanger hold?
The FIG 28-1-PGL is sized for CPVC plastic pipe up to 1 inch maximum. Run anything larger and you need a bigger figure number in the series, not this one.
2) Does this B-Line hanger mount to the side of a stud or joist instead of overhead?
Side mount is exactly what it is built for. The stand-off design fastens to the face of a stud, joist or beam and holds the CPVC off the surface rather than hanging it from a rod above.
3) Is the B-Line FIG 28 CPVC hanger UL Listed for fire sprinkler work?
Yes, the FIG 28-1-PGL carries a UL Listing, which is what an inspector on a CPVC sprinkler installation will be looking for on the hanger.
4) Will a pre-galvanized steel CPVC hanger hold up in a damp basement or parking structure?
The body is steel with a pre-galvanized finish, which handles normal interior and damp-interior service. For direct outdoor exposure, corrosive process areas or coastal work, spec a hot-dip galvanized or stainless hanger instead of the PGL version.
5) Can I use this stand-off hanger on copper or steel pipe?
No. The FIG 28-1-PGL is a hanger and restrainer made specifically for CPVC plastic pipe, and the restrainer geometry is matched to CPVC outside diameters. Use a copper tube ring or a clevis hanger for metallic pipe.
6) What does the restrainer part of this hanger actually do?
It holds the CPVC laterally as well as vertically. CPVC moves with temperature change, so a restraining hanger keeps the line in position on the stud face instead of letting it walk or lift, which is why it is specified for branch lines rather than a plain open hook.
7) What are the dimensions and weight of the B-Line FIG 28-1-PGL hanger?
Each piece measures 3.5 inch width, 3.3125 inch height and .875 inch length/depth, and weighs .21 lb. Small enough that the stand-off offset is what decides clearance behind the pipe, so check your fastener has room on the face of the framing member.
How fast can I get the B-LINE FIG 28-1-PGL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 28-1-PGL come with a warranty?
Absolutely. The B-LINE FIG 28-1-PGL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 28-1-PGL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 28-1-PGL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.