You may also like
B-Line Eaton series CPVC hangers and restraints, Pre-galvanized, 72" hanger spacing, Steel, Side mounting, 1" max pipe size, Hanger for CPVC plastic p
Model: BLN-FIG 24-1-PGL
Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, 72" hanger spacing, Steel, Side mounting, 1" max pipe size, Hanger for CPVC plastic pipe double fastener strap Side Mounted
B-LINE
$57.91
$11.57
B-Line Eaton series CPVC hangers and restraints, Pre-galvanized, 96" hanger spacing, Steel, Side mounting, 2" max pipe size, Hanger for CPVC plastic p
Model: BLN-FIG 24-2-PGL
Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, 96" hanger spacing, Steel, Side mounting, 2" max pipe size, Hanger for CPVC plastic pipe double fastener strap Side Mounted
B-LINE
$60.10
$13.50
B-Line Eaton series CPVC hangers and restraints, Pre-galvanized, Steel, Side mounting, 1" max pipe size, Hanger for CPVC plastic pipe double fastener
Model: BLN-FIG 23-1-2HL-PGL
Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, Steel, Side mounting, 1" max pipe size, Hanger for CPVC plastic pipe double fastener strap
B-LINE
$56.04
$7.71
B-Line Eaton series CPVC hangers and restraints, Electro galvanized, 96" hanger spacing, Steel, Side mounting, 2" max pipe size, Offset hanger and res
Model: BLN-FIG 28M-2-EG
Eaton B-Line series CPVC hangers and restraints, Electro galvanized, 96" hanger spacing, Steel, Side mounting, 2" max pipe size, Offset hanger and restrainer for CPVC plastic pipe
B-LINE
$62.97
$17.36
B-Line Eaton series CPVC hangers and restraints, Pre-galvanized, Steel, Side mounting, 3" max pipe size, Hanger for CPVC plastic pipe double fastener
Model: BLN-FIG 23-3-2HL-PGL
Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, Steel, Side mounting, 3" max pipe size, Hanger for CPVC plastic pipe double fastener strap
B-LINE
$71.34
$28.93
Eaton B-Line series CPVC hangers and restraints, Pre-galvanized, hanger spacing, Steel, Side mounting, 1" max pipe size, Double offset hanger and restrainer for CPVC plastic pipe
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Mounting Method:
- Side mount
- Pipe Size Max:
- 1 in
- Product Height:
- 2.125 in
- Product Length Depth:
- 5.4 in
- Product Weight:
- .186 lb
- Product Width:
- .25 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Hangers
- Product Type:
- Double offset hanger restrainer for CPVC pipe
- Product Details:
- Double offset hanger restrainer for CPVC pipe
- Product Material:
- Steel
- Product Length:
- 5.4 in
B-LINE FIG 29-1-PGL – Frequently Asked Questions
1) What pipe sizes does the B-Line FIG 29-1-PGL CPVC hanger restrainer handle?
The FIG 29-1-PGL double offset hanger and restrainer is built for CPVC plastic pipe up to 1 inch maximum. Anything larger than 1 inch needs a different figure number in the B-Line CPVC hanger range.
2) Is the B-Line FIG 29-1-PGL a UL Listed pipe hanger?
Yes, the FIG 29-1-PGL carries a UL Listed rating, which is what inspectors look for on CPVC fire sprinkler and plastic piping supports.
3) How does a double offset restrainer mount, and can I fasten it to a stud face?
It is a side mount part, so it fastens to the side face of a stud, joist, or structural member rather than hanging off a rod from above. The offset arms carry the pipe clear of the mounting surface while restraining lateral movement.
4) Can I use this restrainer on copper or steel pipe instead of CPVC?
No. The FIG 29-1-PGL is a double offset hanger and restrainer made specifically for CPVC plastic pipe, and its geometry and support spacing are set for that. Use a clevis hanger or pipe clamp rated for metallic pipe on copper or steel runs.
5) Will a steel pre-galvanized hanger hold up in a damp mechanical room or unheated space?
The FIG 29-1-PGL is steel with a pre-galvanized finish, which handles indoor and normally dry-to-damp interior conditions. For continuous wet, corrosive, or exterior exposure, specify a hot-dip galvanized or stainless support instead.
6) What exact part number do I order for the 1 inch pre-galvanized CPVC double offset restrainer?
Order Eaton B-Line FIG 29-1-PGL. That is the single model for the pre-galvanized, side mount, 1 inch maximum CPVC double offset hanger and restrainer.
How fast can I get the B-LINE FIG 29-1-PGL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 29-1-PGL come with a warranty?
Absolutely. The B-LINE FIG 29-1-PGL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 29-1-PGL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 29-1-PGL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.