B-Line Eaton series double sided 24 inch shelf width distribution , 96" height, 37.62" length, 24" width, 10 vertical with 10 shelves, ASTM A36 struct

The frame stands 96 inches high, with a length/depth of 37.62 inches and a width of 24 inches. The 24 inch figure is the shelf width, so plan a run of floor at least 37.62 by 24 inches per frame plus working clearance on both faces, since it is a double sided unit with terminal block shelves on each side.

It supports terminal blocks for central cross connects. The double sided build with 10 verticals and 10 shelves gives you mounting real estate on both faces, so incoming cable can terminate on one side and station or riser cable on the other, with the cross connect jumpers run between them. It is a frame and shelf structure, not a cabinet, so blocks, protectors and cable management are ordered separately.

Steel construction, specified as ASTM A36 structural steel, finished in Telco gray powder coat. That is the standard grey seen in central offices and telecom rooms, so it matches existing frame lineups and runway visually. Powder coat over structural steel holds up in an unconditioned equipment room better than a painted light-gauge frame.

Go double sided when the room allows access from both faces and you are running a central cross connect, which is what this frame is built for: blocks on both sides, jumpers crossing between them, roughly twice the block capacity per square foot of floor. Single sided frames are the right call when the frame has to sit against a wall, since one face of a double sided frame becomes unreachable and you have paid for capacity you cannot terminate on.

Ten verticals with ten shelves, spread over the 96 inch height. Count your block requirement against that before ordering: the shelf count is fixed on this model, so if you need more termination capacity the answer is another frame in the lineup rather than adding shelves to this one.