You may also like
Eaton B-Line series Flextray wire basket tray, 6" X 20", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 6 in
- Product Length Depth:
- 6 in
- Product Weight:
- 1.1 lb
- Product Width:
- 20 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
B-LINE FT BE 6X20 – Frequently Asked Questions
1) What size Flextray does the FT BE 6X20 blind end fit?
The Eaton B-Line Flextray blind end, model FT BE 6X20, is sized for a 6 inch by 20 inch wire basket tray run. Its listed dimensions are 6 in height, 6 in length/depth and 20 in width, so it caps the open end of a tray that is 6 inches deep and 20 inches wide. On a different tray size you need the matching blind end for that width and depth, not this one.
2) What does a blind end do on a wire basket cable tray?
A blind end closes off the cut or terminated end of a basket tray run. It gives the run a finished face, keeps cable from being pushed past the end of the tray, and covers the exposed wire ends of the basket. The FT BE 6X20 is the blind end for a 6 inch deep, 20 inch wide Flextray section.
3) Is the FT BE 6X20 blind end suitable for an indoor electrical room or does it need a coated finish?
It is pre-galvanized steel, which is the standard choice for dry indoor runs such as electrical rooms, data centers, and above ceilings. For washdown, corrosive, or exterior exposure, specify a hot-dip galvanized or stainless Flextray accessory instead, since a pre-galvanized finish leaves cut edges bare.
4) Does this Flextray blind end carry any listings for inspection?
The FT BE 6X20 blind end is UL Classified and CSA compliant, which is what an inspector or a spec-driven institutional buyer will be looking for on a cable tray accessory submittal.
5) What is the exact part number to order the 6 x 20 pre-galvanized Flextray blind end?
Order it as Eaton B-Line part FT BE 6X20. That designation reads as Flextray Blind End, 6 inch by 20 inch, in pre-galvanized steel.
6) How much does the FT BE 6X20 weigh, and will it add load to my tray supports?
At 1.1 lb, the blind end adds essentially nothing to the tray's support loading. It is a light steel end cap, so no extra hanger or trapeze is needed just to carry it.
How fast can I get the B-LINE FT BE 6X20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 6X20 come with a warranty?
Absolutely. The B-LINE FT BE 6X20 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 6X20?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 6X20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.