You may also like
Eaton B-Line series Flextray wire basket tray, 2" X 20", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 2 in
- Product Length Depth:
- 2 in
- Product Weight:
- .68 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
- Product Length:
- 2 in
B-LINE FT BE 2X20 – Frequently Asked Questions
1) What does a Flextray blind end actually do on a wire basket tray run?
A blind end is the cap that closes off the cut end of a Flextray wire basket run. Eaton B-Line part FT BE 2X20 covers the exposed wire ends where a tray terminates at a wall, a panel, or a dead end, so cable is not pulled across cut wire. It is a termination fitting, not a section of tray, so it adds no cable capacity.
2) Which size Flextray does the FT BE 2X20 blind end fit?
It is sized for a 2 inch deep Flextray, and the part designation 2X20 pairs that 2 inch height with a 20 inch tray width. Measurements on record are 2 in height, 2 in width and 2 in length/depth for the fitting itself. If your basket is a different depth or width, order the blind end matched to that combination instead.
3) Does the Flextray blind end carry any listing or approval for inspection?
The FT BE 2X20 blind end is UL Classified and CSA compliant. That is what an electrical inspector or a spec writer on a healthcare or education job will want to see against the tray system documentation.
How fast can I get the B-LINE FT BE 2X20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 2X20 come with a warranty?
Absolutely. The B-LINE FT BE 2X20 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 2X20?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 2X20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.