You may also like
Eaton B-Line series Flextray wire basket tray, 2" X 18", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 2 in
- Product Length Depth:
- 2 in
- Product Weight:
- .68 lb
- Product Width:
- 18 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
- Product Length:
- 2 in
B-LINE FT BE 2X18 – Frequently Asked Questions
1) What size Flextray does the Eaton B-Line FT BE 2X18 blind end fit?
The FT BE 2X18 blind end is sized for a 2 inch deep by 18 inch wide Flextray wire basket run. If your tray is a different width or depth, you need the blind end that matches those two numbers, not this one.
2) Is the B-Line FT BE 2X18 blind end approved for use in a listed cable tray system?
It is UL Classified and CSA compliant, which is what an electrical inspector or a facility engineer standardizing on a listed tray system will be looking for on the submittal.
3) Can a pre-galvanized Flextray blind end be installed outdoors or in a wash-down area?
The FT BE 2X18 is steel with a pre-galvanized finish, which is an indoor, dry-location finish. Cut edges on pre-galv are not coated, so for exterior runs, parking structures, or corrosive and wash-down environments you want a hot-dip galvanized or stainless version of the same part instead.
4) What is a blind end on a wire basket cable tray actually for?
It closes off the cut or terminated end of a Flextray run. Instead of leaving exposed wire ends sticking out where cable jackets can be damaged and installers can catch a hand, the blind end caps the tray face. It is a finishing piece, not a support or a splice, so you still need your splice hardware and hangers separately.
5) Does the blind end come with the hardware to attach it to the tray?
Order your fasteners separately. The FT BE 2X18 is supplied as the blind end component only, so plan on the Flextray splice and mounting hardware your run already uses to secure it.
6) What part number do I order for an 18 inch wide Eaton Flextray end cap?
Manufacturer part number FT BE 2X18, Eaton B-Line series. That designation reads as Flextray, Blind End, 2 inch depth by 18 inch width.
How fast can I get the B-LINE FT BE 2X18 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 2X18 come with a warranty?
Absolutely. The B-LINE FT BE 2X18 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 2X18?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 2X18 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.