You may also like
Eaton B-Line series Flextray wire basket tray, 2" X 8", Steel, Pre-galvanized, Blind ends
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 2 in
- Product Length Depth:
- 2 in
- Product Weight:
- .68 lb
- Product Width:
- 6 in
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Pre-galvanized
- Product Details:
- Blind ends
- Product Material:
- Steel
- Product Length:
- 2 in
B-LINE FT BE 2X8 – Frequently Asked Questions
1) What is a blind end on a Flextray wire basket tray, and what does it do?
A blind end is the cap that closes off the cut end of a wire basket tray run. The Eaton B-Line Flextray FT BE 2X8 covers a 2 inch deep by 8 inch wide tray end, giving the run a finished termination so cable isn't running past exposed cut wires. You order it separately from the tray sections.
2) Is this B-Line Flextray blind end UL classified and CSA compliant for a commercial job?
It is UL Classified and CSA compliant, which is what most commercial and institutional electrical specs call for on cable tray accessories. That covers inspection on the run it terminates.
3) What material and finish is the Flextray blind end, and can I use it outdoors?
Steel with a pre-galvanized finish. Pre-galvanized is the standard indoor and dry-location finish for basket tray, so for corrosive or exposed exterior environments you want a hot-dip galvanized or stainless Flextray accessory instead. Match the blind end finish to the tray so you aren't mixing coatings in one run.
4) Do I need a blind end at every tray termination, or only where cable exits?
Practically, you cap every open end of the basket run: at walls, at equipment drops, and anywhere the tray is field cut. The FT BE 2X8 is the cap for the 2 by 8 inch profile. Count your terminations off the drawing and order one per open end, including any branch stub that dead-ends.
5) Is the FT BE 2X8 a tray section or just an accessory?
Accessory only. It is the end cap, not a length of tray and not a splice. You still order Flextray straight sections, splice hardware, and support brackets separately to build the run.
6) What is the exact B-Line part number to specify for this blind end?
Order Eaton B-Line part FT BE 2X8. That designation reads as Flextray, blind end, 2 inch by 8 inch, and it is what you put on the submittal so the pre-galvanized steel version ships rather than another finish.
How fast can I get the B-LINE FT BE 2X8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 2X8 come with a warranty?
Absolutely. The B-LINE FT BE 2X8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 2X8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 2X8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.