You may also like
Eaton B-Line series Flextray wire basket tray, Black powder coat, Steel, Splice bar
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- .31 in
- Product Length Depth:
- 10.81 in
- Product Weight:
- .28 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Splice bar
- Product Finish:
- Flat black powder coat
- Product Details:
- Splice bar
- Product Material:
- Steel
B-LINE SPLICE BAR BLE – Frequently Asked Questions
1) What does a Flextray splice bar actually do on a wire basket tray run?
It's the connecting piece that joins two sections of Eaton B-Line Flextray wire basket tray end to end, so the run stays continuous and mechanically tied together at the joint. The bar itself is steel with a flat black powder coat finish, 10.81 inches long by 2 inches wide by .31 inches thick, and weighs .28 lb, so it lies along the tray wires at the splice point rather than adding bulk to the run.
2) Is the B-Line Flextray black splice bar UL Listed for use in a commercial electrical install?
Yes, it's UL Listed. That's the piece most inspectors and spec writers want confirmed on cable tray splice hardware, and it's why this bar goes into institutional, data center and healthcare runs where the tray system has to be listed end to end.
3) Will a black powder coat splice bar match my existing black Flextray run?
The finish is flat black powder coat over steel, which is what Eaton uses on the black Flextray sections. If your existing basket tray is the black powder coat version, the splice bar matches it. If your run is pre-galvanized, electro-zinc or stainless, order the splice bar in that same finish instead so the joint doesn't stand out and so the corrosion protection stays consistent through the run.
4) How many splice bars do I need per joint on a wire basket tray?
Splice bars are ordered per connection point, not per tray section, and a basket tray joint normally takes a bar on each side wire of the tray. Each one is a single steel bar 10.81 inches long, so count your joints, double for the two sides, and add spares for field cuts where you shorten a section and create an extra splice. The part is sold as a single bar, model SPLICE BAR BLE.
5) Does the splice bar come with the bolts and nuts to fasten it?
The item is the splice bar itself, a single steel bar in flat black powder coat. Plan on sourcing the splice hardware (bolts, flange nuts or the equivalent Flextray fastener) separately when you build out the material list, so the crew isn't short at the joint.
6) What's the exact part number to order for the black Eaton B-Line Flextray splice bar?
Order it as SPLICE BAR BLE from Eaton's B-Line Flextray line. The BLE suffix is the black powder coat steel version; other finishes in the Flextray family carry different suffixes, so quote the full designation when you're standardizing a bill of material across a facility.
7) Will a .31 inch thick splice bar clear my tray hangers and trapeze supports?
The bar is only .31 inches thick and 2 inches wide, so it adds roughly a quarter to a third of an inch of profile at the joint. That normally clears standard trapeze and center-hung basket tray supports, but if you're splicing directly over a hanger or running tight to a ceiling deck or a duct, shift the splice off the support point rather than stacking the bar and the hanger at the same spot.
How fast can I get the B-LINE SPLICE BAR BLE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SPLICE BAR BLE come with a warranty?
Absolutely. The B-LINE SPLICE BAR BLE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SPLICE BAR BLE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SPLICE BAR BLE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.