You may also like
Eaton B-Line series Flextray wire basket tray, Steel, Black powdercoat, Long splice bar
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .13 lb
- Product Width:
- 2 in
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Long splice bar
- Product Finish:
- Flat black powder coat
- Product Details:
- Long splice bar
- Product Material:
- Steel
B-LINE FTS12SBBLE – Frequently Asked Questions
1) What does the Eaton B-Line FTS12SBBLE long splice bar do in a Flextray wire basket run?
The FTS12SBBLE is a long splice bar for Eaton B-Line Flextray wire basket tray. It joins two sections of wire basket tray end to end so the run stays continuous and mechanically tied together. It is a splice component only, not a tray section, so you order it in addition to the tray lengths.
2) Is the Eaton B-Line Flextray long splice bar UL classified and CSA compliant for a commercial cable tray install?
Yes. The FTS12SBBLE long splice bar is UL Classified and CSA compliant, which is what an institutional or MRO spec usually calls for on cable tray splice hardware.
3) Will the black FTS12SBBLE splice bar match black powder coated Flextray already installed?
Finish is flat black powder coat over steel, the same finish family as black powdercoat Flextray sections, so a spliced joint reads consistent along the run. If your existing tray is pre-galvanized or zinc plated, this bar will stand out visually at every joint.
4) What size is the Eaton B-Line long splice bar, and how much clearance does it add at the joint?
Dimensions are 1 in height, 1 in length/depth and 2 in width, and it weighs .13 lb. It is a small flat bar, so it adds essentially no meaningful bulk to the tray profile at a splice, which matters when the run is tight to a ceiling deck or between hangers.
5) Is a steel splice bar suitable for a damp or exterior wire basket tray run?
The bar is steel with a flat black powder coat, which is a painted finish intended for indoor and protected environments. For wet, corrosive or exterior runs, specify a hot dip galvanized or stainless splice component instead of the black powder coated version.
6) How many splice bars do I need per Flextray joint?
Splice bars are sold as individual pieces, and the FTS12SBBLE is a single long splice bar. Quantity depends on how many you use per joint on your tray width and depth, so count your joints and multiply. Only one model is offered here, FTS12SBBLE, so there are no finish or size options to specify.
How fast can I get the B-LINE FTS12SBBLE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FTS12SBBLE come with a warranty?
Absolutely. The B-LINE FTS12SBBLE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FTS12SBBLE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FTS12SBBLE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.