You may also like
B-Line Eaton series Flextray wire basket tray, Works with all splicing needs, Steel, Black powdercoat, 1-3/16 square splice washer
Model: BLN-BTM WASHER BLE
Eaton B-Line series Flextray wire basket tray, Works with all splicing needs, Steel, Black powdercoat, 1-3/16 square splice washer
B-LINE
$56.07
$7.71
Eaton B-Line series Flextray wire basket tray, Works with all splicing needs, Steel, Hot-diped galvanized, 1-3/16 square splice washer
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- .8125 in
- Product Length Depth:
- .8125 in
- Product Weight:
- 4 lb
- Product Width:
- .8125 in
- Special Features:
- Works with all splicing needs
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- 1-3/16 square splice washer
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- 1-3/16 square splice washer
- Product Material:
- Steel
B-LINE BTM WASHER HDG – Frequently Asked Questions
1) What is the B-Line BTM WASHER HDG used for on Flextray wire basket tray?
It's the square splice washer used at Flextray wire basket tray splice connections. The washer seats under the splice hardware so the clamping load spreads across the wire mesh instead of pulling through a single wire, and Eaton states it works with all Flextray splicing needs rather than being tied to one splice kit.
2) Is the Eaton B-Line splice washer UL Classified and CSA compliant for an inspected installation?
Yes. The BTM WASHER HDG splice washer is UL Classified and carries CSA compliance, which is what an inspector looks for on cable tray splice components in an electrical installation.
3) Do I need anything besides the washer to make up a Flextray splice?
The washer on its own does not join the tray. It is the load-spreading component that goes with the splice bolt and nut hardware at the joint, so order the matching Flextray splice hardware alongside it, in hot-dipped galvanized to match this washer's finish.
4) How big is the 1-3/16 square splice washer, and will it clear the mesh openings on my tray?
The washer is described as a 1-3/16 square splice washer, with height, width and length depth all listed at .8125 inch. The square shape is what lets it bridge across adjacent wires of the basket mesh rather than dropping into an opening.
5) Is BTM WASHER HDG sold as a single washer or a box?
BTM WASHER HDG is the one orderable model, and its product weight is listed at 4 lb, which points to a bulk pack rather than a single piece of hardware. Order by that model number for the hot-dipped galvanized version.
How fast can I get the B-LINE BTM WASHER HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BTM WASHER HDG come with a warranty?
Absolutely. The B-LINE BTM WASHER HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BTM WASHER HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BTM WASHER HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.