B-Line Eaton series ground mounted panel enclosure, 60" height, 16" length, 48" width, 4X, Hinged cover, ES4XS enclosure, Ground mount, Large double

Yes. The ES4XS enclosure carries a NEMA 4X rating, built from 304 stainless steel with a closed cell neoprene gasket, so it is suited to outdoor, wet, and corrosive duty such as washdown bays, water treatment, and food processing areas. The 12 gauge wall thickness and #4 brushed finish are what you would expect on a corrosion-duty box rather than a painted carbon steel one.

60 inches high, 48 inches wide, and 16 inches deep. That depth is the number to check first: 16 inches limits how much you can stack front to back once a back panel, breakers, and wire bend radius are accounted for. The 48 inch width is why it uses a large double door design rather than a single door.

No. The ES-604816-4XS is supplied with no mounting provisions, so there is no back panel, subpanel, or rail kit in the box. If you are mounting breakers, terminal blocks, drives, or a PLC, order a back panel or panel mounting kit separately and budget for it in your bill of material.

Ground mount. The ES4XS is a floor or pad standing enclosure, not a wall mount box, so plan on a concrete pad or a channel base and anchor it. At 403.7 lb empty it is a rigging and equipment job to set, not a two-man lift.

It is certified to UL 508A, the standard for industrial control panels, so panel shops can use it as the enclosure for a 508A listed assembly. The enclosure certification is only part of the listing, the completed panel still has to be built and labeled to 508A.

Yes. The doors use a stainless handle with 3-point latching and include a key lock padlock provision, so you can hang a padlock for restricted access or a lockout program. The 3-point latch is what keeps a 60 inch door leaf pulled tight to the gasket top, middle, and bottom, which is how the 4X seal is maintained.

On a box this size a hinged cover is the practical choice. The ES4XS uses hinged double doors, so a technician can open the panel single handed for service without wrestling a 48 inch loose cover off and finding somewhere to set it. A screw cover suits small junction boxes that are rarely opened; a 60 by 48 inch control enclosure gets opened for troubleshooting, and the hinge plus 3-point latch handle is what makes that repeatable without damaging the gasket.

Country of origin is the US, which matters on public work and institutional purchase orders that carry domestic sourcing language. The orderable part number is ES-604816-4XS from the Eaton B-Line ES4XS series if you need to cite it on a submittal.