B-Line Eaton series ground mounted panel enclosure, 60" height, 24" length, 48" width, 4X, Hinged cover, ES4XS enclosure, Ground mount, Large double

Yes. The ES4XS enclosure carries a NEMA 4X rating and is built from 304 stainless steel with a closed cell neoprene gasket, so it handles outdoor exposure, hose-directed water and corrosive atmospheres like coastal salt air or washdown areas. The 12 gauge body gives it the wall thickness for exposed ground-level service locations.

It measures 60 inches high, 48 inches wide and 24 inches deep. That depth is generous for a ground mount cabinet, which is what lets it take deeper gear and wire bending space behind a double door opening.

No. The ES-604824-4XS is supplied with no mounting provisions, so there is no interior back panel, rails or weld studs included. Budget a separate sub-panel and mounting kit if you are landing a starter, PLC or terminal blocks inside it.

It is a large double door cabinet with hinged covers, closed by a stainless handle with 3-point latching. Locking is handled through a key lock padlock provision, so you can padlock it shut or use the keyed handle for restricted access in a public or ground-level location.

It is certified to UL 508A, the standard for industrial control panels, so it is an acceptable enclosure for building up a listed control panel assembly.

466.2 lb empty. At that weight it is not a two-man carry, so plan for a forklift, hoist or telehandler at the pad and set the concrete base before delivery. It is a ground mount design, not a wall-hung box.

The enclosure ships with no factory knockouts or mounting provisions, so field penetrations are on you. Any hole you cut in the 304 stainless body has to be closed with a NEMA 4X rated hub or fitting, ideally in the bottom or side rather than the top, or the 4X rating of the cabinet is void at that point.

A NEMA 3R painted steel cabinet only sheds falling rain and is fine for a dry inland site. The ES4XS is 4X in 304 stainless, which adds hose-directed water and corrosion resistance, so it is the choice for coastal, wastewater, food processing, car wash or chemical exposure. If your site is none of those and the cabinet is sheltered, 3R is the lighter and simpler route.

It has a #4 brushed stainless finish on 304 stainless steel. It is a bare, unpainted mill finish, so nothing needs to be coated for corrosion protection. If architectural color matters on a visible site, you are matching brushed stainless, not a painted grey.

It is manufactured in the United States, which matters if you are procuring under domestic-preference rules on a government, utility or federally funded project.