Eaton B-Line series meter breakers, 200 A, Single meter position, Ring type, 3R, Underground, ANSI 61 gray painted, 010 kAIC, #6 - 250 MCM, MCB, (2) 100 A, 2P, Galvanized steel, Surface mount, 4 jaws, 3 wires, 1 phase, 1Ø/3W, 120/240 V
Manufacturer Resources
Product Specs
- Amperage Rating:
- 200A
- Application:
- Single meter position
- Bus Material:
- Aluminum
- Certifications:
- UL
- Compliances:
- EUSERC Approved
- Interrupt Rating:
- 10 kAIC
- Main Circuit Breaker:
- (2) 100 A, 2P
- Phase:
- Single-phase
- Product Height:
- 25 in
- Product Length Depth:
- 6 in
- Product Weight:
- 35 lb
- Product Width:
- 14 in
- Voltage Rating:
- 120/240V
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
B-LINE U2M11R – Frequently Asked Questions
1) Will the Eaton B-Line U2M11R meter breaker work on a 120/240V single phase residential service?
Yes. The U2M11R is a single phase, 120/240 V meter breaker rated 200 A, wired 1 phase / 3 wire with a 4 jaw meter socket. That is the standard residential and small commercial service configuration. It is a single meter position unit, so one service only.
2) What breakers come in the U2M11R meter breaker, and can it feed two units?
It ships with two 100 A, 2 pole main circuit breakers behind a 200 A rated socket. That pair of mains is what lets one 200 A service feed two separate 100 A loads, such as a duplex or a house plus a shop, without a separate distribution panel.
3) Is this Eaton B-Line meter socket rated for outdoor use?
Yes. It is a NEMA 3R enclosure in galvanized steel with ANSI 61 gray paint, built for surface mounting outdoors on an exterior wall. 3R handles rain and sleet; it is not a washdown or submersible rating.
4) Is the U2M11R for overhead or underground service entrance?
Underground. The U2M11R is configured for an underground service lateral, so conductors enter from below. If your utility drop comes in overhead, you need the overhead version of the meter breaker instead.
5) Does this meter breaker meet utility requirements for a sealed ring type socket?
It is a ring type socket, UL certified and EUSERC approved, which is what most western utilities require for service equipment acceptance. Ring type means the meter is retained by a sealing ring rather than a ringless cover, so confirm which style your utility specifies before ordering.
6) What size service conductors can I land in this 200 A meter breaker?
The lugs accept #6 through 250 MCM, onto aluminum bus. That range covers typical 100 A through 200 A copper and aluminum service entrance conductors.
7) How much wall space does this Eaton B-Line meter breaker need?
It measures 25 in high, 14 in wide and 6 in deep, and weighs 35 lb. Plan the mounting so the meter face lands at the height your utility requires and keep the working clearance in front of the enclosure clear.
How fast can I get the B-LINE U2M11R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE U2M11R come with a warranty?
Absolutely. The B-LINE U2M11R is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE U2M11R?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE U2M11R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.