B-Line Eaton series open racks, 108" height, 6.375" length, 6" width, Rack mounted vertical cabling section dual hinging removable, Flat black powder

The B-Line Eaton SB57166S108FB is a rack mounted vertical cabling section measuring 108 inches in height, 6 inches wide and 6.375 inches deep. At 108 inches it is a 9-foot tall section, so it is taller than a standard 84 inch (7-foot) open frame rack. If your frames are 7-foot, you need the shorter height version of the section, not this one.

Yes. The SB57166S108FB section uses a dual hinging removable gate, so the door swings from either side and can be lifted off entirely. That is the point of the design: with the gate off you can lay cable straight into the channel instead of threading it, then rehang the gate to dress the run.

This is a 6 inch wide by 6.375 inch deep section, which is the narrow-profile size used where floor space between racks is tight or for moderate copper counts. If you are terminating high-density patch fields and need room for slack loops and jumper storage, step up to a wider channel; 6 inches fills quickly once you have several 48-port panels feeding into it.

It is a rack mounted section, meaning it bolts to the rack frame uprights rather than standing on its own base or bolting to the floor. It works either between two frames in a lineup or on the end of a row, but it always takes its support from the rack it attaches to.

Flat black powder coat, listed as black. It matches the standard flat black finish used across Eaton B-Line open frame rack lineups, so a mixed row of frames and vertical sections reads as one assembly.

The section weighs 21 lb, so the weight itself is not the issue. The length is: at 108 inches it is awkward to hold plumb against the rack uprights while starting the fasteners, so plan on a second set of hands or a temporary support rather than extra lifting capacity.