B-Line Eaton series open racks, 96" height, 6.375" length, 6" width, Rack mounted vertical cabling section dual hinging removable, Flat black powder

Plan on a 6 inch wide by 6.375 inch deep footprint running the full 96 inch height. In a row of racks, budget that 6 inches of aisle or bay width per manager, and remember a dual hinging door needs swing clearance on both sides.

The gate on the SB57166S096FB opens from either side and lifts off entirely. That matters during a big pull: you drop the gate off, lay bundles straight into the channel instead of threading them, then rehang it. On live racks it also means you can open from whichever side the aisle allows.

The finish is flat black powder coat, black in color, which is the standard finish on Eaton B-Line open frame racks. If your existing racks are the flat black powder coated version, this section matches. Gloss black or gray equipment will read as a different finish next to it.

Horizontal managers handle the jumper slack at each patch panel; they do nothing for the trunk running floor to top of rack. A 96 inch vertical section like the SB57166S096FB carries that vertical bundle in a 6 inch wide channel beside the rails, clear of the equipment. On a fully loaded open frame rack with multiple panels and switches, you want both.

It comes packaged assembled in a protective carton, so the section and its dual hinging removable gate arrive ready to mount to the rack rather than needing build-up on site.