B-Line Eaton series open racks, 72.625" height, 7" length, 6" width, Aluminum, RCM rack mounted vertical cable manager single sided, Direct pdu mount

Yes. The B-Line SB86286S078FB vertical cable manager stands 72.625 inches tall, which is the usable height of a standard 7-foot (84 inch) open frame rack once the base and top are accounted for. It mounts on the rack upright and occupies the full vertical run, so plan your rack elevation around a manager that takes the entire height rather than a partial section.

It is 6 inches wide and 7 inches deep. In a hot aisle or a tight closet that 6 inches of width gets added to each side of the rack where a manager is installed, so measure the aisle before committing. The 7 inch depth is what determines how much cable bundle the channel will hold.

Single sided. The RCM rack mounted vertical cable manager routes cable on one face only, which suits a rack placed against a wall or the end of a row. If you need to separate copper from fiber or keep front and rear pathways independent, you want a double sided manager instead.

Yes, it is built for direct PDU mounting, so a vertical rack PDU attaches to the manager itself rather than eating rack units in the frame. That is the reason to pick this version over a plain cable channel: power and cable share the same 6 inch side bay.

Low density plastic gates in black, snap on style. Cabling routes between the snap on gates, so you push bundles in from the side and the gates retain them, with no hinged door to swing open into the aisle. Gates are quicker for adds and moves than a door with latches, but they give a more open look, which matters if the rack is in a visible space.

Aluminum body with a flat black powder coat finish and black plastic components, weighing 10.2 lb. One installer can hold it against the rack upright while starting the fasteners, which is not always true of a full height steel manager.

UL is the certification carried on the SB86286S078FB vertical cable manager. That is the marking to reference when a drawing or an institutional spec calls for listed cable management components.

The finish is flat black powder coat on the aluminum, with black plastic gate components, so it reads as flat black throughout rather than gloss. If your existing racks are a textured or gloss black there will be a slight sheen difference side by side, but the color itself is black.

The vertical cabling section is included, so the channel that carries the bundle up the rack comes with the manager. Fasteners for attaching a PDU and the PDU itself are separate items.