Eaton B-Line series open frame racks, Aluminum, #12-24 mounting hardware, Three (3) mounting spaces required, Aluminum - brushed finish, Single sided rack mounted shelf solid shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 5.19 in
- Product Length Depth:
- 10 in
- Product Weight:
- 2.9 lb
- Product Width:
- 22.31 in
- Special Features:
- Three (3) mounting spaces required
- Department:
- Electrical
- Product Model:
- Single sided rack mounted shelf solid shelf
- Product Finish:
- Brushed aluminum
- Product Material:
- Aluminum
- Product Length:
- 10 in
B-LINE SB747S2310AAL – Frequently Asked Questions
1) How much rack space does the Eaton B-Line SB747S2310AAL shelf take up?
Plan on three mounting spaces. The shelf is stated as requiring three (3) mounting spaces, and its overall height is 5.19 inches, so budget 3U of open frame rack before you lay out the gear above and below it.
2) How deep is the SB747S2310AAL rack shelf, and will a small switch or media converter sit on it?
The usable footprint is 10 inches deep by 22.31 inches wide, so short depth gear like a compact switch, media converter, or power supply sits fully supported. Anything deeper than 10 inches will overhang the front or rear edge.
3) What mounting hardware does this B-Line open frame rack shelf use?
It mounts with #12-24 hardware, which is the thread B-Line specifies for these Eaton series open frame racks. If your rails are tapped 10-32 or use cage nuts, you will need to match the rack rail thread rather than assume the shelf screws drop in.
4) Is this a solid shelf or a vented one?
Solid. The SB747S2310AAL is a single sided rack mounted solid shelf, so there are no vent slots in the deck. If the equipment you are setting on it relies on bottom intake, a vented shelf is the better choice.
5) Is the B-Line rack shelf steel or aluminum, and how much does it weigh?
Aluminum, in a brushed aluminum finish, and it weighs 2.9 pounds. The light weight makes it easy for one tech to hold in place while starting the screws, and aluminum avoids the rust issue you get with painted steel in damp mechanical or telecom rooms.
6) Does single sided mean it only bolts to the front rails?
Yes. The SB747S2310AAL is a single sided shelf, so it fastens to one set of rails and cantilevers out 10 inches. It is intended for open frame racks where there is no rear rail to pick up, which is why keeping the load light and centered matters.
7) What part number do I order for the brushed aluminum B-Line rack shelf?
Order Eaton B-Line SB747S2310AAL. That is the single configuration for this shelf: aluminum construction, brushed aluminum finish, solid deck, single sided, three mounting spaces.
How fast can I get the B-LINE SB747S2310AAL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB747S2310AAL come with a warranty?
Absolutely. The B-LINE SB747S2310AAL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB747S2310AAL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB747S2310AAL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.