B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, #12-24 mount holes, 200 lb load cap.,Double sided universal, Black po

Yes. The SB704232524FB is a 19 inch panel mount open frame rack, so any standard 19 inch rack-mount panel, switch, or shelf lands on the uprights. The mounting holes are tapped #12-24, so you use #12-24 screws directly, no cage nuts.

Load capacity is 200 lb. The frame itself only weighs 14 lb, aluminum uprights with steel extension brackets, so nearly all of your wall anchoring budget goes to the equipment. Weigh your switches, patch panels, and any UPS before you commit; battery units eat that 200 lb fast and are usually better floor-mounted.

Double sided universal means the rack has mounting rails on both the front and rear faces of the frame, so you can mount equipment from either side or support deeper gear front and back rather than cantilevering it off a single rail. Useful when you are hanging a switch on one side and a patch panel on the other in a tight wall-mount closet.

An open frame like this one gives you the easiest cable access and the best passive airflow, and it is the cheaper way to hang 19 inch gear in a locked telecom closet. Go with an enclosed wall cabinet instead if the rack sits in a public corridor, tenant space, or shop floor where you need a lockable door, or where dust and tampering are a real problem. The open frame offers no physical security on its own.

Uprights are aluminum with steel extension brackets, finished in flat black powder coat. That combination handles a normal unconditioned utility or telecom closet fine. It is not a sealed or outdoor-rated assembly, so for a wet location or exterior wall you want a gasketed NEMA-rated enclosure instead.

Order it as Eaton B-Line series model SB704232524FB, flat black powder coat, 19 inch panel mount wall rack, 200 lb capacity. Quoting that single designation gets you the double sided universal frame with #12-24 tapped mounting holes.