B-Line Eaton series open racks, Aluminum with steel hinge and mounting brackets, Height: 84", Mounting spaces: 43, 10" to 18" adjustable depth, Telco

Yes. The Eaton B-Line SB542084TG open frame swing gate rack is a 19 inch wide rack with 43 mounting spaces over its 84 inch height, so it takes standard 19 inch rack-mount patch panels, switches, and rack-mount telecom gear.

Both. The SB542084TG is a wall and floor mounted swing gate network equipment rack, so it anchors to the wall and lands on the floor, with the frame swinging out on a steel hinge for rear access. It ships with steel hinge and mounting brackets.

The rack adjusts from 10 to 18 inches deep, with a 12 inch depth as the base dimension, so plan your wall run for the deepest setting you intend to use plus clear floor space for the gate to swing out on its hinge. At 84 inches tall it needs about seven feet of vertical clearance.

The SB542084TG frame is aluminum, with steel used where the loads concentrate, at the hinge and the mounting brackets. The whole rack weighs 50.4 lb, which is why one person can hang it on a wall in a telecom closet. If you are floor stacking heavy servers rather than patch panels and network gear, a full steel floor rack is the better choice; this is built as a wall and floor mounted network equipment rack.

43 mounting spaces across the 84 inch frame. That is the usable capacity for panels and gear, so count your equipment in rack units against 43 before ordering.

Order Eaton B-Line SB542084TG. That is the single configuration: 84 inch height, 43 mounting spaces, 10 to 18 inch adjustable depth, aluminum, Telco gray powder coat.

It is finished in Telco gray powder coat, the standard gray used across Eaton B-Line telecom racks and ladder rack, so it lines up with existing Telco gray equipment in a network closet.