B-Line Eaton series open racks, Aluminum with steel hinge and mounting brackets, Height: 96", Mounting spaces: 50, 10" to 18" adjustable depth, Telco

The SB542096TG is a 96 inch tall open frame rack with 50 mounting spaces (50U) of usable rail. At 19 inches wide it takes standard 19 inch rack-mount network gear.

Both. The SB542096TG is built as a wall and floor mounted swing gate rack, so it fastens to the wall and also lands on the floor, which is what you want at 96 inches of height carrying loaded equipment. The steel hinge and mounting brackets are the swing side, letting the frame pivot away from the wall so you can get behind the gear for cabling.

The frame is aluminum, with steel used at the hinge and mounting brackets where the load and pivot stress concentrate. That keeps the frame itself light at 53.7 pounds, which matters when one or two techs are setting a 96 inch rack against a wall and anchoring it.

A swing gate makes sense when the room is tight and the rack has to live against a wall: it hinges out so you can reach the rear of the gear without walking around it. A free-standing two-post rack needs clear access on both sides and floor space in the middle of the room. The SB542096TG is the wall-and-floor swing gate version, 96 inches tall with 50 mounting spaces, so you get full-height capacity out of a wall line instead of a floor island.

Order Eaton B-Line SB542096TG. That number is the 96 inch, 50 space, 10 to 18 inch adjustable depth aluminum swing gate rack in Telco gray.

Finish is Telco gray powder coat, the standard gray used across telecom and network rooms, so it lines up visually with existing telco gray frames and ladder rack.