B-Line Eaton series open racks, Flat black powder coat, 200 lb load capacity, Aluminum, Mounting harware included, Shelf and sliding keyboard drawer

Yes. The SB744M1915FB is built at 19 inches wide, which is the standard EIA rack mounting width, and it extends 15 inches deep behind the rails. Before ordering, confirm you have 15 inches of clear depth in the rack and that the keyboard drawer can slide forward without hitting a door or wall, since it is a sliding drawer with a mouse tray.

The unit stands 4.75 inches tall at the front, so plan on roughly 3U of vertical rack space (1U is 1.75 inches). If you are laying out a rack with patch panels and a switch above, budget that full height rather than a single U.

Mounting hardware is included with the SB744M1915FB, so you do not need to order rack screws or washers to hang it. Match the hardware to your rail thread if your rack is tapped rather than square-hole.

It is rated for a 200 lb load capacity. That covers a keyboard, mouse and a monitor or small KVM on the shelf surface. The shelf itself is aluminum and weighs 19 lb, so a single installer can hang it without help.

Order Eaton B-Line part number SB744M1915FB. That is the flat black, 19 inch wide by 15 inch deep aluminum shelf with the sliding keyboard drawer and mouse tray. Nearby SB744 numbers change the width, depth or finish, so specify the full suffix when you order.

Aluminum is the right call for a shelf like this. The SB744M1915FB is aluminum yet still rated at 200 lb, and the light 19 lb unit weight keeps it easy to mount overhead in a two-post rack. Aluminum also does not rust, which matters in unconditioned closets and mechanical rooms. Steel would only be worth chasing if you needed a load above that rating.

It is finished in flat black powder coat, the same finish used across the Eaton B-Line open frame rack line, so it reads as a matched set alongside existing black B-Line two-post and four-post racks. Flat black, not gloss, so it will not stand out next to painted rails.