B-Line Eaton series open racks, Flat black powder coat, 200 lb load capacity, Shelf and sliding keyboard drawer

The B-Line Eaton series shelf with sliding keyboard drawer measures 23 inches wide overall, which is the mounting-flange width for a standard 19 inch EIA rack (19 inch rail opening plus the flanges that span the rack uprights). Depth into the rack is 15 inches and the panel height is 4.75 inches, so plan on roughly three rack spaces of clear vertical room and at least 15 inches of usable depth behind the front rails.

The keyboard drawer is part of the unit. Model SB7442315FB is a combination fixed shelf with a sliding keyboard drawer underneath, so you get the work surface and the pull-out tray in one piece of hardware instead of buying a shelf and a separate tray.

Rated at 200 lb load capacity. That covers a monitor, a KVM, or a small UPS along with the keyboard tray in use. The shelf itself weighs 15.8 lb, which matters when you are figuring total loading on a two-post open frame rack.

It is aluminum with a flat black powder coat finish. The flat (non-gloss) black is the common finish on open frame data racks and cable management, so it reads consistently alongside existing black-powder-coat two-post racks and ladder rack in the same room. Aluminum keeps the unit light at 15.8 lb for a 200 lb rated shelf.

Probably not the best fit. This B-Line Eaton series unit is built for open frame racks and gives 15 inches of depth, which suits a two-post rack where a technician stands at the front to work. In a deep enclosed cabinet holding servers you generally want a four-post mounted shelf sized to the cabinet depth. Use this one where you want a keyboard and monitor position at an open rack.