B-Line Eaton series open racks - Length 7 in, Width 10 in, Height 60.375 in - Black - Aluminum

The manager stands 60.375 inches tall, which is the vertical run you need clear space for beside the rack uprights. It measures 10 inches wide and 7 inches deep (length/depth), so plan that footprint in your aisle or cabinet bay. Match the 60.375 inch height against your rack's usable vertical space before committing, since the manager mounts to the rack frame rather than the floor.

Single sided. The RCM rack mounted vertical cable manager routes cable on one face, so it suits a rack placed against a wall or one where you only need to dress cable on the front. If you need cable managed on both the front and rear faces of the same channel, a single sided unit will not do it.

Yes, direct PDU mounting is part of the design, so a rack PDU can be fastened to the manager rather than eating rack units in the frame. That is the main reason data center and MRO buyers pick this style over a plain plastic finger duct.

It uses a low density plastic gate style, with black plastic components over the aluminum body. The gates hold cable in the channel while still letting you drop a new run in without pulling the whole bundle apart. Low density means fewer, wider gate openings, which is fine for moderate cable counts but less suited to very dense fiber or Cat6 bundles.

UL is the certification carried on the Eaton B-Line RCM vertical cable manager. That is the line item most facility and government procurement specs want to see documented before a comms room build gets signed off.

No. A vertical cabling section is included with the unit, so the channel that carries the cable run comes as part of the manager. You will still need to source your own mounting hardware to suit your rack frame and any PDU you intend to attach.

Order it as Eaton B-Line SB862810S066FB. That is the manufacturer part number for the 60.375 inch tall, 10 inch wide, 7 inch deep single sided RCM manager in flat black.

Flat black powder coat over aluminum, with black plastic gate components to match. The flat finish matches most black open frame racks and cabinets, so it will blend with existing equipment in a comms room rather than standing out gloss against a matte rack.

At 8.9 pounds it is a one-person lift, which is what you would expect from an aluminum body rather than steel. The awkward part is the 60.375 inch length, not the weight, so having a second set of hands to steady it while you start the mounting screws makes the job faster.