B-Line Eaton series open racks, Steel, #12-24 mounting hardware, Flat black powder coat, Center mount rack mounted shelf, Two mount spaces required,

The B-Line center mount rack shelf is rated for a 200 lb load capacity. It's a welded steel shelf, so that rating covers switches, UPS units, or other gear you don't want hanging off a single pair of rails.

Two mounting spaces are required for this center mount shelf, so plan on 2U of open rail before you order. Its height is 2 in.

This is a center mount rack mounted shelf, meaning it attaches at the rack's mounting rails and carries the load from that center support rather than from a four-post frame. If you need equipment supported front and rear in an enclosed cabinet, a four-post sliding or fixed shelf is the better choice; a center mount shelf is intended for two-post open frame relay racks.

It ships as #12-24 mounting hardware, which is the thread B-Line and most open frame relay racks are tapped for. If your rack rails are tapped 10-32 instead, the shelf will physically span the rails but you will need screws matching your rail thread.

Order Eaton B-Line part number SB5962313SFB. It is a single configuration, 21.5 in wide by 13 in deep steel shelf in flat black, 200 lb capacity, occupying two rack spaces, so repeat orders land identically closet to closet.

Flat black powder coat, which is the same finish B-Line uses across its open frame rack line, so it blends with existing black relay racks and cable management. One model is offered, SB5962313SFB, so there is no alternate finish to choose.