B-Line Eaton series pipe clamps and accessories, 8.68" height, 10" length, " width, Steel, Standard pipe clamp, Electro-plated zinc

The B3140-10ZN is sized for 10 inch pipe. It is a standard two-piece pipe clamp, so the clamp diameter has to match the pipe outside size, not the fitting or insulation over it. Overall height of the clamp is 8.68 inches, which is what you need to allow between the pipe and the structure or rod above it.

Yes. The B3140-10ZN is the clamp only. Threaded rod, nuts, and the upper attachment to the structure (beam clamp, concrete insert, or strut) are all separate items and need to be specified to suit the pipe load and the building structure.

It is steel with an electro-plated zinc finish, which is the standard indoor and dry-location plating. That covers unheated interior mechanical rooms and plenums well enough, but it is not a hot-dip galvanized or stainless part, so for exterior runs, wash-down areas, or corrosive process spaces you want a galvanized or stainless clamp instead.

A standard pipe clamp like the B3140-10ZN bolts around the pipe in two halves and grips it, so it holds the pipe in position against movement and works for both hanging and riser-style support. A clevis hanger cradles the pipe and lets it move axially, which is what you want on a hot line that has to expand and slide. Pick the clamp where you want the pipe held; pick the clevis where you want it to travel.

Order B3140-10ZN. The B3140 is the clamp series, the 10 is the pipe size in inches, and the ZN suffix is the electro-plated zinc finish. If you are standardizing a building, that same numbering pattern is how you match other pipe sizes in the series.

No certification is applicable to the B3140-10ZN. It is a plain steel support component, so if your spec calls for a listed or labeled support assembly, the listing will sit with the overall hanger assembly or the seismic bracing system, not with this clamp.