Eaton B-Line series runway support, Telco gray, Used with 3/8" X 2" stringers, Cable runway center hung supports
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 7.625 in
- Product Length Depth:
- 27 in
- Product Weight:
- 5 lb
- Product Width:
- 24 in
- Special Features:
- Telco gray
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Cable runway center hung supports
- Product Details:
- Cable runway center hung supports
B-LINE SB2127S242TG – Frequently Asked Questions
1) What stringer size does the B-Line SB2127S242TG center hung runway support work with?
The Eaton B-Line SB2127S242TG center hung support is built for 3/8 inch by 2 inch cable runway stringers. If your runway uses a different stringer profile, this bracket is the wrong part. Match the stringer cross section before ordering, since the clamping geometry is what holds the runway on the support.
2) What runway width will this B-Line center hung support carry?
It is sized for 24 inch wide cable runway, which is the width dimension on the part. The support also measures 27 inches in overall length/depth and 7.625 inches in height, so allow that vertical space between the runway and the ceiling or threaded rod attachment point.
3) What is a center hung runway support and when should I use one instead of a wall-mounted bracket?
A center hung support picks the runway up from above, typically on threaded rod dropped from the structure, and carries it from the middle of the span. Use it where the runway crosses open floor away from walls or above equipment rows. Wall angle or triangular support brackets are the choice when the run follows a wall and you can anchor into it. The SB2127S242TG is the center hung type for 24 inch runway on 3/8 inch by 2 inch stringers.
4) Will this support match the gray finish of my existing B-Line cable runway?
The finish is Telco gray, the standard color used across Eaton B-Line runway and ladder rack components, so it blends with existing gray runway rather than standing out as a patched-in piece.
5) How much does the B-Line SB2127S242TG weigh, and do I need help setting it?
Five pounds. One person can set it on the rod and thread the nuts, which is why center hung runway is usually installed by a single tech working off a lift with the stringers staged below.
How fast can I get the B-LINE SB2127S242TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB2127S242TG come with a warranty?
Absolutely. The B-LINE SB2127S242TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB2127S242TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB2127S242TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.