B-Line Eaton series runway support, Telco gray, Used with 3/8" X 2" stringers, 15" runway width, Cable runway center hung supports

A center hung support hangs the runway from the structure above, rather than bracing it off a wall or standing it on floor posts. It is what you use for mid-span support on a runway crossing open ceiling area between racks. Along a wall, a wall angle support is the better choice; where you need vertical load carried to the floor, use floor-mounted posts instead.

Yes, the SB2127S152TG center hung runway support is UL Listed, which is what most institutional and government specs call for on cable support hardware.

The bracket stands 7.625 in high and runs 21 in in length/depth, over a 15 in width. Plan the drop rod length and overhead clearance around that 7-5/8 inch height so the support does not crowd sprinkler heads, lighting, or the top of adjacent racks.

No. The SB2127S152TG is the runway support bracket only. The drop rod, ceiling anchors, and any rod couplings or nuts for your slab or structural steel are ordered separately and sized to your ceiling condition.

Telco gray is the finish here, which is the standard color for Eaton B-Line cable runway and ladder rack in data and telecom rooms. It matches existing gray runway and accessories in the same room without repainting.

Each one is 3.5 lb. That matters when you are totalling dead load on a threaded rod and anchor layout across a long runway with supports at regular intervals, since the hardware weight adds up before any cable goes in.