Eaton B-Line series runway support, Yellow zinc, Aluminum, Used with 3/8" X 2" stringers, 9" runway width, Cable runway center hung supports
Manufacturer Resources
Product Specs
- Application:
- 9 in runway width
- Certifications:
- UL Listed
- Product Height:
- 7.625 in
- Product Length Depth:
- 12 in
- Product Weight:
- 2.5 lb
- Product Width:
- 9 in
- Special Features:
- Yellow zinc
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Cable runway center hung supports
- Product Details:
- Cable runway center hung supports
- Product Material:
- Aluminum
- Product Length:
- 12 in
B-LINE SB2127S092YZ – Frequently Asked Questions
1) What size stringer does the SB2127S092YZ center hung support clamp to?
It is made for 3/8 inch by 2 inch cable runway stringers. If your runway uses a different stringer profile, this support will not seat correctly.
2) Is a center hung support the right choice, or should I use wall or ceiling brackets?
A center hung support carries the runway from above at mid-span, between end points. Use it where a long ladder rack run needs intermediate support and there is no wall to butt against. Wall angle brackets are for terminating or supporting a run at a wall; this part is the drop support in the middle of the run.
3) Is the B-Line SB2127S092YZ runway support UL Listed for a telecom room install?
Yes, it is UL Listed, which is the box inspectors and institutional spec writers usually want checked on cable runway support hardware.
4) How much headroom do I need above the runway for this center hung support?
Plan for the support's 7.625 inch height above the stringer, plus whatever threaded rod and ceiling attachment you use. Its footprint along the run is 12 inches, so keep that stretch of stringer clear of cable exits and splice plates.
5) Does the center hung runway support come with threaded rod and ceiling anchors?
No. The part ordered is the support itself, model SB2127S092YZ. Threaded rod, ceiling anchors or beam clamps, and the hardware attaching to structure are separate and sized to your slab or bar joist condition.
6) Is this runway support aluminum or steel, and is it OK in a humid equipment room?
The body is aluminum with a yellow zinc finish, so it resists corrosion better than bare steel in a data room or telecom closet. At 2.5 lb it is also light enough to handle overhead one-handed while you set the threaded rod.
7) What is the exact part number to order for the 9 inch yellow zinc center hung support?
Order Eaton B-Line MPN SB2127S092YZ. That number carries the 9 inch runway width, aluminum construction, and the yellow zinc finish in one configuration.
How fast can I get the B-LINE SB2127S092YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB2127S092YZ come with a warranty?
Absolutely. The B-LINE SB2127S092YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB2127S092YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB2127S092YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.