You may also like
Eaton B-Line series single meter sockets, 200 A, 7 jaws, ANSI 61 gray coat, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 18 in
- Product Length Depth:
- 5 in
- Product Weight:
- 19 lb
- Product Width:
- 12 in
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Aluminum
- Product Length:
- 5 in
B-LINE U207 F – Frequently Asked Questions
1) Is the B-Line U207 F meter socket rated for a 200 amp residential service?
Yes, the Eaton B-Line U207 F is a single-position meter socket rated 200 A with a 7-jaw configuration. The 7-jaw arrangement is what a utility specifies for network or three-phase metering rather than the standard 4-jaw single-phase socket, so confirm your utility's jaw requirement before ordering.
2) What size enclosure do I need to plan for when roughing in the U207 F meter socket?
Plan for an enclosure 18 inches high, 12 inches wide and 5 inches deep. That 5 inch depth matters on shallow wall cavities and on tight equipment rooms where the socket sits beside a panel. It weighs 19 pounds, so one person can set it, but backing behind the mounting surface is worth having.
3) Will a 7-jaw meter socket work where my existing socket has 5 jaws?
No. Jaw count has to match the meter the utility sets, and a 7-jaw socket accepts a 7-jaw meter. If the existing can is 5-jaw, replacing it with the U207 F means the utility has to change the meter as well, which is a coordinated swap, not a straight retrofit. Confirm the jaw count on the utility work order first.
4) Does this meter socket include a main breaker or disconnect?
No. The U207 F is a single meter socket only, a metering enclosure with 7 jaws rated 200 A. Overcurrent protection and the service disconnect are separate equipment. If your job calls for metering and a main disconnect in one can, you need a meter main combination rather than this socket.
5) Can this B-Line meter socket be mounted outdoors on an exterior wall?
The enclosure is aluminum with an ANSI 61 gray paint finish, a combination used for exterior service equipment because aluminum will not rust through at the seams the way painted steel can once the coating is scratched. The socket is UL Listed. For coastal or wash-down sites, check the utility's approved equipment list for the specific enclosure type they will accept.
6) What is the manufacturer part number for the B-Line 200 A 7-jaw meter socket in gray?
Order it as Eaton B-Line U207 F. That number covers the single-position, 200 A, 7-jaw aluminum socket in ANSI 61 gray. Give the utility the U207 F designation when you submit the service application so the jaw count is on record.
How fast can I get the B-LINE U207 F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE U207 F come with a warranty?
Absolutely. The B-LINE U207 F is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE U207 F?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE U207 F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.