B-Line Eaton series single meter sockets, 200 A, ANSI 61 gray coat finish, Aluminum

The B-Line U207-HLP single meter socket is a 200 A device, sized for a typical 200 amp residential or light commercial service. It handles one meter position only, so a duplex or multi-position application needs a different socket.

The socket enclosure measures 18 inches high, 12 inches wide, and 5 inches deep, and it weighs 16 pounds. Lay out your meter board or wall backing for that 18 x 12 footprint and allow for the 5 inch projection off the wall plus conduit entry clearance above and below.

No. The U207-HLP is a meter socket only, a single 200 A meter position in a painted aluminum enclosure. There is no integral main breaker or disconnect, so the service disconnecting means has to be provided separately downstream, typically a main breaker panel or a fused service disconnect. If you need metering and disconnect in one can, you want a meter-main combination instead.

UL Listed, yes. That covers the AHJ inspection side of the job. Serving utilities also maintain their own approved meter socket list, so check the socket against your utility's accepted equipment schedule before it goes on the wall.

The enclosure is aluminum with an ANSI 61 gray paint finish. Aluminum does not rust the way painted steel does once the coating is scratched, which is why it is the common choice for exterior service equipment on coastal and damp sites. ANSI 61 gray is the standard utility and switchgear color, so it matches adjacent service gear on the same wall.

For individual 200 A services, yes, this is the single-position socket you would repeat unit by unit. Where several tenant meters sit on one wall fed from a common service, a gang or multi-position meter stack is usually the cleaner install than a row of individual sockets, since it consolidates the service entrance and the utility connection. Use the single socket where each unit has its own service drop or lateral.

Order by manufacturer part number U207-HLP, from the Eaton B-Line meter socket line. The short catalog description is the 200 A single meter socket in aluminum with ANSI 61 gray paint. Meter socket catalog numbers vary by jaw count, ring type, and bypass arrangement, so match the full part number rather than just the amperage when replacing one in kind.