Eaton B-Line series strut channel, nuts, all threaded rod, Steel, Channel nuts, Spring nut, Yellow zinc chromate, 5/8"-11 thread size
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 5/8"-11
- Certifications:
- Not Applicable
- Product Category:
- Channel nuts
- Product Height:
- .85 in
- Product Length Depth:
- 1.375 in
- Product Weight:
- .088 lb
- Product Width:
- .85 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Spring nut
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Spring nut
- Product Material:
- Steel
B-LINE N525YZN – Frequently Asked Questions
1) What thread size does the B-Line N525YZN spring nut take?
The N525YZN channel nut is tapped 5/8"-11, so it mates with 5/8-inch coarse threaded rod or 5/8-inch hex bolts. If your rod is 1/2-13 or 3/8-16, this is the wrong nut, pick the matching thread size instead.
2) Will a B-Line spring nut hold itself in the strut before I tighten the rod?
Yes. The N525YZN is a spring nut, meaning it carries a spring that pushes the nut body up against the inturned lips of the channel so it stays put wherever you slide it. That lets you position hangers one-handed overhead and then run the 5/8-11 rod up into it.
3) Is a yellow zinc chromate channel nut okay for outdoor or damp locations?
Yellow zinc chromate over steel is a coated finish intended for dry indoor and protected service. It is not a stainless or hot dip galvanized part, so for exterior runs, wash-down areas, or corrosive process spaces, specify a hot dip galvanized or stainless channel nut instead of the N525YZN.
4) What are the actual dimensions of the B-Line N525YZN channel nut?
It measures .85 in by .85 in by 1.375 in and weighs .088 lb each. The .85 in square footprint is what rides inside the channel throat, and the 1.375 in figure is the overall depth including the spring, so allow for that when you are stacking nuts back to back or working in a shallow cavity.
5) Can I use a B-Line spring nut to hang threaded rod for conduit and pipe supports?
That is exactly what it is for. Drop the nut into the strut, slide it to the layout mark, and thread 5/8-11 all-thread up into it to pick up trapeze hangers, conduit racks, or pipe clamps. The spring holds the position while you set the rod height.
6) How many B-Line N525YZN nuts come in a box, and how do I order the right one?
Order by the manufacturer part number N525YZN, which identifies the 5/8-11 steel spring nut in yellow zinc chromate. That single model number covers the thread, material, and finish in one call out, so it is all your purchasing agent needs on the PO.
How fast can I get the B-LINE N525YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE N525YZN come with a warranty?
Absolutely. The B-LINE N525YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE N525YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE N525YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.