B-Line Eaton series strut fittings and accessories, 4.62" Height, 24" Length, 1.62" Width, 4.50lbs, Steel, Single channel bracket, Uniform load capaci

The B409-24GRN single channel bracket carries a uniform load capacity of 480 lbs. That is a uniform load across the bracket, not a point load at the free end, so spread the supported run (conduit, pipe, tray) along its 24 inch length rather than hanging everything off the tip.

It measures 24 inches long, 4.62 inches high and 1.62 inches wide, and weighs 4.5 lbs. The 1-5/8 inch width is standard strut channel width, so it lines up with a 1-5/8 inch strut run for mounting.

DURA GREEN is Eaton B-Line's green coating over the steel bracket. It gives you corrosion protection for indoor and sheltered industrial areas such as mechanical rooms, plant interiors and parking structures. For direct weather exposure or wash-down environments, buyers typically step up to a hot dip galvanized or stainless strut bracket instead.

B409-24GRN is a single channel bracket: one run of channel forming the arm, 1.62 inches wide, 24 inches out from the wall. Single channel brackets handle typical conduit, small pipe and cable tray support. Where the cantilever load is heavier or the arm needs to resist twisting, electricians move to a double channel (back to back) bracket of the same length. At 480 lbs uniform capacity, the single channel covers most electrical distribution work.

The B409-24GRN is supplied as the bracket alone, 4.5 lbs of steel channel bracket. Anchors into the wall or structure, and the channel nuts, bolts and conduit or pipe clamps used to attach the load to the bracket, are ordered separately and sized to your substrate and to the conduit being carried.

Order catalog number B409-24GRN. The B409 series designation is the single channel bracket, the 24 is the 24 inch arm length, and GRN is the DURA GREEN finish.