Eaton B-Line series strut fittings and accessories, For support pipe on top or hanging support bracket, 2578 Lb load cap, Stainless steel, Light duty welded bracket, Plain
Manufacturer Resources
Product Specs
- Application:
- Support pipe on top or hanging support bracket
- Certifications:
- Not Applicable
- Load Capacity:
- 2578 lbs
- Product Height:
- 24 in
- Product Length Depth:
- 18 in
- Product Weight:
- 25.78 lb
- Product Width:
- 21.5 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Light duty welded bracket
- Product Finish:
- Plain
- Product Details:
- Light duty welded bracket
- Product Material:
- Steel
- Product Length:
- 18 in
B-LINE B3066-1 PLN – Frequently Asked Questions
1) How much weight can the B-Line B3066-1 welded bracket hold?
The B3066-1 bracket is rated at 2578 lbs load capacity. That is the figure to check your pipe run, conduit bank or equipment weight against before you hang it, including the weight of contents in the pipe.
2) Can this B-Line bracket support pipe from above as well as below?
Yes. The B3066-1 is made to support pipe resting on top of the bracket or to act as a hanging support bracket, so it works whether the run sits on the arm or is suspended from it.
3) What are the dimensions of the B-Line B3066-1 strut bracket?
The B3066-1 measures 24 in height, 21.5 in width and 18 in length/depth, and the bracket itself weighs 25.78 lb. Lay those against your available wall or ceiling space before you set the strut, since the 18 in depth is what determines how far the supported pipe sits off the mounting surface.
4) Is the B-Line B3066-1 a welded bracket or does it bolt together on site?
It ships as a light duty welded bracket, so the arm and back are already joined. You are only mounting the assembly and fastening the pipe or strut to it, not building the bracket up from separate fittings.
5) What finish does the B3066-1 bracket come in, and is it suitable for a wet or corrosive area?
It comes in a plain finish, meaning no coating or plating is applied. For exposed exterior, wash-down or corrosive environments you would normally specify a coated or plated bracket instead; plain is the choice for dry interior mechanical and electrical rooms.
6) Does the B-Line B3066-1 bracket carry any listings or certifications?
Certifications are marked Not Applicable for the B3066-1, so if your submittal calls for a listed or agency-labeled support, specify a product that carries that label. For general pipe and conduit support in an electrical or mechanical space, the 2578 lb load rating is the governing number.
7) What do I order this B-Line bracket by, and does it come in more than one size?
It is ordered as a single model, B3066-1 PLN, the PLN denoting the plain finish. There are no size or finish options to select, so the part number is the whole specification.
How fast can I get the B-LINE B3066-1 PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3066-1 PLN come with a warranty?
Absolutely. The B-LINE B3066-1 PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3066-1 PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3066-1 PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.