Eaton B-Line series strut mounting bracket, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.569lbs, Conduit size: 3.5" EMT/Rigid, Conduit and cable clamps, 3.626" Max mount size, 4.126" Min, 350 lbs load capacity, Pre-galvanized
Manufacturer Resources
Product Specs
- Application:
- Attaches to cable tray rungs and strut profiles
- Cable Diameter Min:
- 4.126 in
- Certifications:
- CE
- Load Capacity:
- 350 lbs
- Mounting Dimensions Max:
- 3.626
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .569 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit and cable clamps
- Product Size:
- Conduit size: 3.5 inch EMT/Rigid
- Product Details:
- Conduit and cable clamps
B-LINE BL350 – Frequently Asked Questions
1) What conduit size does the Eaton B-Line BL350 clamp take?
The BL350 is sized for 3-1/2 inch EMT or rigid conduit. It is a conduit and cable clamp, so it holds the run itself rather than a threaded rod or hanger. If your run is a smaller trade size, this is the wrong part number in the series.
2) What does the Eaton B-Line BL350 bracket mount to?
It attaches to cable tray rungs and strut profiles, so it works off an existing tray or strut channel run. You are not drilling into deck or wall with this piece; the support has to already be there.
3) How much weight will the B-Line BL350 conduit clamp hold?
Rated at 350 lbs load capacity. That is the clamp's rating only; the tray rung or strut it hangs from has its own limit, and on a long conduit run the spacing of your supports is what usually governs.
4) What mounting size range does the BL350 strut bracket cover?
Published mounting dimension is 3.626 max, with 4.126 in as the other published figure in the clamped range. Measure the outside diameter of what you are clamping against those numbers before you order a case of them.
5) Is the B-Line BL350 clamp galvanized for damp or outdoor locations?
The BL350 is pre-galvanized. That is a mill-galvanized coating suited to indoor and protected locations; for direct weather exposure or corrosive environments, spec a hot-dip galvanized or stainless clamp instead.
6) What is the manufacturer part number for this B-Line conduit clamp?
Order it as Eaton B-Line BL350. That single model covers the 3-1/2 inch EMT/rigid size; there are no finish or size options to specify alongside it.
7) Does the Eaton B-Line BL350 carry any certification for a spec submittal?
CE is the certification listed for the BL350. If your submittal calls for a UL file number, that is not something carried on this part's record, so verify against the manufacturer's submittal sheet for that line item.
How fast can I get the B-LINE BL350 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BL350 come with a warranty?
Absolutely. The B-LINE BL350 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BL350?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BL350 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.