B-Line U2M2RP F Eaton series m...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,909.86
B-Line U2M2RP F Eaton series meter breakers, 200 A, Single meter position, Ring type, 3R, Underground, ANSI 61 gray painted, 010 kAIC, #6 - 250 MCM, MCB, (1) 200 A, 2P, Galvanized, Flush mount, 4 jaws, 3 wires, 1 phase, 1Ø/3W, 120/240 V

B-Line U2M2RP F Eaton series meter breakers, 200 A, Single meter position, Ring type, 3R, Underground, ANSI 61 gray painted, 010 kAIC, #6 - 250 MCM, MCB, (1) 200 A, 2P, Galvanized, Flush mount, 4 jaws, 3 wires, 1 phase, 1Ø/3W, 120/240 V

(No reviews yet) Write a Review

Model: U2M2RP F
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,909.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series meter breakers, 200 A, Single meter position, Ring type, 3R, Underground, ANSI 61 gray painted, 010 kAIC, #6 - 250 MCM, MCB, (1) 200 A, 2P, Galvanized, Flush mount, 4 jaws, 3 wires, 1 phase, 1Ø/3W, 120/240 V

Manufacturer Resources

Product Specs

Amperage Rating:
200A
Application:
Single meter position
Bus Material:
Aluminum
Certifications:
UL
Compliances:
EUSERC Approved
Interrupt Rating:
10 kAIC
Main Circuit Breaker:
(1) 200 A, 2P
Phase:
Single-phase
Product Height:
25 in
Product Length Depth:
6 in
Product Weight:
39 lb
Product Width:
14 in
Voltage Rating:
120/240V
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE U2M2RP F – Frequently Asked Questions

1) Will the B-Line U2M2RP F meter breaker work on a 120/240V single-phase residential service?
Yes. The U2M2RP F is a single-phase, 3-wire meter breaker rated 120/240 V at 200 A, with a single meter position and a 4-jaw socket. That is the standard configuration for a typical single-family or small commercial 1-phase/3-wire service. It will not serve a 3-phase service.
2) Is this meter breaker for overhead or underground service entrance?
Underground. The U2M2RP F is built for an underground service lateral feed, so it has no weatherhead or overhead hub provision. If the utility is bringing service in overhead, you need an overhead-configured meter breaker instead.
3) Can the U2M2RP F be flush mounted in a wall, or does it surface mount?
It is a flush mount enclosure, built to recess into the wall with the trim finishing to the surface. Plan the rough opening around the 25 in height by 14 in width by 6 in depth cabinet. At 39 lb it is a one-person set in most cases.
4) What size service entrance conductors will the lugs on this 200 A meter breaker take?
The line and load terminations accept #6 through 250 MCM, which covers typical 200 A copper and aluminum service entrance conductors. The bus is aluminum.
5) Does this meter breaker meet the available fault current on my service?
The U2M2RP F is rated 10 kAIC. If the utility transformer calculation at your service point shows available fault current above 10,000 A, this unit is not adequate and you need a higher interrupting rating.
6) Is this a ring type or ringless meter socket?
Ring type. The meter is secured with a sealing ring, which is what many utilities specify. If your utility requires a ringless cover, this unit will not pass their inspection.
7) Is a main breaker included, or do I supply it?
The main is factory installed: one 200 A, 2-pole main circuit breaker. Nothing else to order for the main disconnect.
8) Will this meter breaker get approved by a West Coast utility?
It is EUSERC approved, which is the standard the western utilities use for service equipment, and the unit carries a UL listing. Utility-specific approval still comes down to their local list, but EUSERC is the baseline they check.
9) Can this be installed outdoors?
Yes. The enclosure is 3R rated for outdoor rain-tight service, built from galvanized steel with an ANSI 61 gray painted finish. Standard practice for a flush-mounted exterior wall application.
10) What part number do I give the counter for this Eaton B-Line meter breaker?
Order it as B-Line U2M2RP F. That is the manufacturer part number for the 200 A, single position, ring type, 3R, underground, flush mount configuration.
How fast can I get the B-LINE U2M2RP F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE U2M2RP F come with a warranty?
Absolutely. The B-LINE U2M2RP F is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE U2M2RP F?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE U2M2RP F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!