You may also like
Baldwin 0397 SOL Flush Cup Handle and Solid Spindle Ring Pull
The Baldwin 0397 SOL is a solid brass flush cup pull with a solid spindle ring, sized at 3-1/2" x 3-1/2". It installs flush into the door face, making it well-suited for sliding doors, barn doors, and applications where a projecting handle is not practical. Solid forged brass construction provides the structural integrity required for repeated daily use.
Key Specifications
- Overall size: 3-1/2" x 3-1/2"
- Material: Solid forged brass
- Pull type: Flush cup with solid spindle ring
- Application: Sliding doors, barn doors, flush-mount installations
- Suitable for marine environments
- Finish options: 056 Lifetime PVD Satin Nickel, 102 Oil Rubbed Bronze
Finish
The 056 Lifetime PVD Satin Nickel finish is applied over solid brass and is backed by Baldwin's Limited Lifetime Finish Warranty. The 102 Oil Rubbed Bronze finish provides a dark, hand-applied appearance. Select the finish variant above.
Manufacturer Resources
Manufacturer Resources
Product Specs
- Subcategory:
- Pulls and Push Plates
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Type:
- Flush Cup Pulls
- Product Subgroup:
- Flush Pulls
- Commercial/Residential:
- Residential
- Handle Type:
- Pull
- Series:
- Estate
- Product Model:
- 0397 SOL
- Product Size:
- 3-1/2"
- Product Dimension:
- 3-1/2" x 3-1/2"
- Product Substrate:
- Brass
- Product Category:
- Door Trim & Accessories
- Department:
- Door Hardware
Baldwin 0397102SOL – Frequently Asked Questions
1) Will the Baldwin 0397 SOL flush ring pull work on a pocket door or sliding barn door?
That's what a flush cup pull is for. The 0397 SOL sits flush in the door face so the leaf can pass into a pocket or slide past a jamb with nothing protruding, and the ring folds down into the cup when you let go. It mortises into the door at 3-1/2 x 3-1/2 inches. If you need a handle that stands proud of the face, this is the wrong part.
2) What size cutout do I need to mortise in the Baldwin 0397 flush pull?
Plan the mortise around a 3-1/2 by 3-1/2 inch square face. That is the full dimension of the pull, so the pocket in the door has to accept that footprint plus the cup depth, with the flange trimming the edge. Baldwin publishes a drilling template for the 0397 if you want the exact depth before you commit a router to a finished door.
3) Can I use a Baldwin 0397 flush pull outdoors or in a coastal, salt-air location?
Baldwin recommends the 0397 for marine use, which is unusual for a decorative pull and comes down to the solid brass body. The 056 Lifetime PVD Satin Nickel is the one to specify in that environment: it is nickel plated over solid brass with a PVD topcoat, so the finish itself is built to hold up. The 120 Oil Rubbed Bronze is a living finish and will change tone with exposure.
4) How is the Baldwin 0397 ring pull different from the flat Emtek rectangular flush pulls?
Shape and grip. The 0397 is a square 3-1/2 by 3-1/2 inch cup with a lift-out ring you hook a finger through, so you get real purchase on a heavy slab. The Emtek 2201 Rectangular brass flush pull is a tall narrow 1-3/4 by 4 inch recess with no ring, as is the Emtek 220304 Modern Rectangular at the same size. Emtek's 2205 Brass #8 runs 1-7/8 by 5 inches. Those narrow rectangles want less material removed from the stile, which matters on a slim door; the Baldwin needs a wider pocket but gives you something to actually pull on.
5) My door stile is too narrow for a 3-1/2 inch square flush pull. What else can I use?
Go to a narrow rectangular pull. The Emtek 2201 and the Emtek 220304 Modern Rectangular are both 1-3/4 by 4 inches, so they take less than half the width across the stile. For a rustic look at close to the same width, the Emtek 220404 Rustic Modern Rectangular sandcast bronze is 2 by 4 inches. The Baldwin 0397 needs the full 3-1/2 inches of face to land.
6) What is the difference between the Baldwin 0397 SOL flush cup pull and the Emtek 2201 rectangular flush pull?
Both are brass flush pulls that recess into the door face, but they differ in footprint and grip. The Baldwin 0397 SOL measures 3-1/2 inches by 3-1/2 inches, a square cup with a solid spindle ring that swings up out of the recess for a full-hand grip. The Emtek 2201 Rectangular is a 1-3/4 inch by 4 inch brass flush pull, a narrow upright rectangle where the fingers enter the cup itself. If the pocket door stile is narrow, the 1-3/4 inch width of the 2201 fits where a 3-1/2 inch square cutout will not; if a property manager wants something a gloved hand can pull hard on, the ring on the 0397 SOL gives that.
7) Is the Baldwin 0397 SOL solid brass or plated pot metal?
Solid brass, forged rather than cast or stamped. The ring is a solid spindle ring, not a hollow wire loop, which is what keeps it from flexing when someone hauls a heavy slab open by it.
8) What finishes does the Baldwin 0397 SOL ring pull come in?
Two: 056 Lifetime PVD Satin Nickel and 120 Oil Rubbed Bronze. If you are matching existing Baldwin Estate trim on the other doors, match the number and not the description, since 056 is the PVD satin nickel specifically and other Baldwin satin nickels are different finish codes.
9) Is the Baldwin 0397 flush pull rated for a commercial building or apartment turnover work?
Baldwin lists the 0397 SOL as residential. For single-family, condo, and high-end multi-family interiors it is the right kind of part. For a commercial opening where you need a graded, cycle-tested pull, specify commercial hardware instead.
10) Do I need two flush pulls for a pocket door, or does one cover it?
One 0397 SOL covers one face. A pocket door you operate from both sides needs two, one mortised into each side of the slab, and a bypass pair needs one per accessible face. Count the faces, not the doors.
11) I want a bronze flush pull with a ring. Is the Baldwin 0397 or the Emtek sandcast the right call?
Only the Baldwin gives you a ring. The 0397 SOL in 120 Oil Rubbed Bronze is a solid brass cup with a lift-out solid spindle ring. Emtek's 220404 Rustic Modern Rectangular is sandcast bronze at 2 by 4 inches, a flat recessed pull with no ring and a heavier cast texture. Pick the Emtek if you want the rustic cast look, the Baldwin if you need something to hook a finger through.
12) Is the Emtek 220404 Rustic Modern Rectangular a substitute for the Baldwin 0397 SOL?
They are not interchangeable in the same cutout and they are not the same material. The Emtek 220404 Rustic Modern Rectangular is a 2 inch by 4 inch sandcast bronze flush pull, a vertical rectangle with the texture and tone that sandcast bronze carries. The Baldwin 0397 SOL is a 3-1/2 inch by 3-1/2 inch square brass cup with a swing-up ring, offered in Lifetime PVD Satin Nickel and Oil Rubbed Bronze. A door already mortised for the 0397 SOL square will show open material around a 2 inch by 4 inch plate, so treat the 220404 as a new-cutout choice rather than a drop-in swap.
13) Which flush pull gives the longest hand opening, the Baldwin 0397 SOL or the Emtek 2205 Brass #8?
The Emtek 2205 Brass #8 is the longer plate at 1-7/8 inches by 5 inches, so the recess itself runs five inches vertically and takes several fingers along its length. The Baldwin 0397 SOL is a 3-1/2 inch by 3-1/2 inch square, but it carries a solid forged spindle ring that lifts clear of the cup, which is what a heavy slab or a marine-exposed door usually needs to break loose. Contractors choosing between them are choosing between a longer static finger recess and a ring the whole hand can close on.
14) I want a simpler flush pull than the Baldwin 0397 SOL with no moving ring. What are my options?
The Emtek 220304 Modern Rectangular is a 1-3/4 inch by 4 inch brass flush pull with a plain recessed profile and no swinging part, and the Emtek 2201 Rectangular is the same 1-3/4 inch by 4 inch brass footprint in a traditional rectangular series. Either removes the pivoting element entirely, which matters on a fleet of closet or pocket doors where a moving ring is one more thing to loosen. The Baldwin 0397 SOL keeps the solid forged spindle ring, and its square 3-1/2 inch by 3-1/2 inch body is a different cutout from either Emtek.
How fast can I get the Baldwin 0397102SOL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 0397102SOL come with a warranty?
Absolutely. The Baldwin 0397102SOL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 0397102SOL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 0397102SOL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.