Baldwin Reserve Tube Passage Contemporary Leverset

Yes. The Reserve Tube passage lever mounts in the 2-1/8 inch standard cross bore with a 1 inch edge bore for the latch, and it works with either a 2-3/8 or 2-3/4 inch backset. That is the same prep most residential doors already carry, so on a replacement job the existing holes normally take it without drilling.

It does not lock. This is a passage function lever, non-keyed, with no cylinder and no thumbturn, so both levers always retract the latch. Use it on halls, closets and pantry doors. For a bedroom or bath where you want the door to lock from inside, a passage set is the wrong function, and for an exterior or office door you want an entrance function such as the Hager 2525 or Callan Artino.

The Baldwin Reserve Tube leverset is a non-keyed passage lever built on a cylindrical chassis, and Baldwin lists it for residential use. If the same hall or closet opening sits in a commercial building, the Falcon K101 is a Grade 1 heavy duty cylindrical passage lock with non-handed levers, fire rated, and fits doors 1-3/8 inch to 2-1/4 inch thick. The Corbin Russwin CL3110 is another Grade 1 passage/closet lever, vandal resistant and fire rated, for doors 1-3/4 inch to 2 inch. Both are latch-only like the Baldwin, so the door still pushes open from either side with no key and no lock.

A passage lever such as the Baldwin Reserve Tube is non-keyed and latches only, so it will not hold a bathroom door shut. For a privacy opening, the Kwikset 300BRNL Breton privacy lever is a Grade 3 privacy/bed/bath set for doors 1-3/8 inch to 1-3/4 inch thick, and the Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch. Both add the thumbturn and emergency release that a bed or bath door needs.

The Baldwin Reserve Tube leverset is a non-keyed passage set, so no cylinder can be added to it. For a keyed opening on the same cylindrical prep, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle for doors 1-3/8 inch to 2 inch, the Dexter C1000 entry/office is a Grade 1 clutching keyed lever for doors 1-3/8 inch to 1-3/4 inch, and the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset. Pair the keyed set on the entry door with the passage set on the interior doors if you want one look through the unit.

No. The Reserve Tube passage lever operates a latch, so the lever retracts a bolt and holds the door closed. A dummy lever is fixed trim with no latch and no chassis - it is surface mounted as a pull. The Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever, the BEST 9K Series 1DT is a Grade 1 heavy duty non-keyed single dummy trim, the BEST 7KC Series 1DT is the Grade 2 medium duty version, and Emtek supplies dummy pairs such as the Athena and Helios cast stainless levers. Use a dummy only on an inactive leaf or a door with a ball catch; on a door that must latch, it is not a substitute.

Baldwin lists the Reserve Tube leverset as residential. Where the traffic count argues for a commercial-duty chassis on the same passage function, the Falcon T101 is a Grade 1 heavy duty cylindrical passage lever with pressure release technology, the Falcon K101 is a Grade 1 heavy duty fire rated passage lock, and the Design Hardware X75 is a Grade 1 passage lever lockset with a flat lever for 1-3/4 inch doors. A step below those, the Falcon B101 is a Grade 2 medium duty passage lever with a non-handed design, and the Hager 2510 is a Grade 2 passage lever with the Withnell design for doors 1-3/8 inch to 2 inch.

The Reserve Tube passage lever covers both common backsets, 2-3/8 and 2-3/4 inch, which are the two dimensions used on North American doors. Measure from the door edge to the centre of the bore hole and you will land on one of them.

Three contemporary rose shapes: CFR five inch rectangular-style rose, CRR round rose, and CSR square rose. Each rose is offered in all six finishes, 044 Satin Brass PVD, 055 Polished Nickel PVD, 112 Venetian Bronze, 150 Satin Nickel, 190 Satin Black and 260 Polished Chrome. Pick the rose first, since it sets how much of the door face is covered and whether it reads round or square against the other hardware in the room.

Yes. A split finish option can be specified when ordering, so the hall side and the room side can be different finishes across the six offered. Door thickness can also be entered on the order so the set is supplied to suit your door.

A passage set latches, so on a closet with a roller catch or a false door you want a dummy trim instead. Dummy levers we carry include the Emtek Athena and Helios cast stainless pairs, the Accentra 455LN Augusta Grade 1 single dummy, and the BEST 9K Series 1DT Grade 1 dummy trim. Those mount to the face of the door with no latch and no bore for a latch.

The Baldwin Reserve Tube is a residential contemporary lever offered on five inch, round, and square roses in six finishes. On a rental unit interior door where the trim just has to match and work, the Kwikset 200BRNL Breton passage lever is a Grade 3 passage/hall/closet set for doors 1-3/8 inch to 1-3/4 inch, and the Callan Asheville is a Grade 3 passage leverset in satin nickel. The Bravura Atlanta, Orlando, and Tampa passage leversets are Grade 2 sets, with the Atlanta and Orlando on round trim and the Tampa on square trim if you want to keep the round or square rose shape.

Where a door runs past the usual 1-3/4 inch, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, the widest passage range in the group. The Hager 2510 Grade 2 passage lever covers 1-3/8 inch to 2 inch, and the Arrow GL01 Grade 2 Sierra lever passage lock covers 1-3/4 inch to 2 inch. The Design Hardware J75 and X75 passage sets are built for 1-3/4 inch doors specifically.

The Reserve Tube leverset is a mechanical non-keyed passage set with no code entry. For keyless operation on a comparable lever, the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for doors 1-3/16 inch to 2 inch, the Lockey 2835DC is the double combination version over the same thickness range, and the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination and passage function for doors 1-1/8 inch to 2 inch. The Delaney LP250 is a Grade 2 electronic keypad leverlock if you want a battery-powered set rather than a mechanical one.

The Baldwin Reserve Tube passage lever is a residential set, so it will not carry a Grade 1 commercial spec. For a facility standard on passage openings, the Falcon K101 is Grade 1 heavy duty and fire rated, and the Corbin Russwin CL3110 is Grade 1, vandal resistant, and fire rated. Keeping the same series across the building lets the keyed openings match: Corbin Russwin builds the CL3300 series alongside it, and Dexter carries C1000 Grade 1 classroom, classroom security, and asylum functions on one chassis family.

Both are non-keyed passage levers on a cylindrical chassis. The Reserve Tube is a Baldwin residential set in a contemporary design, offered in six finishes across three rose shapes. The Accentra Augusta passage sets are commercial: the 5301LN is a Grade 2 passage/closet lever in the 5300 series and the 4601LN is a Grade 2 passage lever with Augusta trim in the 4600 series. The Augusta trim is a single commercial lever style rather than a choice of decorative roses.

Yes. A passage lever such as the Reserve Tube has no lock at all, so it cannot secure a storage or mechanical room. For a lever that stays locked outside and always exits free, the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for doors 1-3/8 inch to 1-3/4 inch, and the Hager 2580 is a Grade 2 storeroom cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch.

Nothing about handing is specified for this set. What you do need to settle is the backset, 2-3/8 or 2-3/4 inch, the 2-1/8 inch cross bore and the 1 inch edge bore, plus your door thickness, which is entered when ordering.

The Reserve Tube passage lever is a residential contemporary set that comes in satin brass PVD, polished nickel PVD, Venetian bronze, satin nickel, satin black, and polished chrome. For decorative entry function in the same residential vein, Deltana offers the Claremont, Manchester, Morant, and Linstead lever entry sets, with the Manchester, Morant, and Linstead covering doors 1-3/8 inch to 2 inch. The Bravura Miramar passage leverset with round trim is a Grade 2 set in US4 satin brass if you are matching a brass interior run.