BEA 10BOX45RNDSM 4.5" Round Pu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$39.08
$29.97
BEA 10BOX45RNDSM 4.5" Round Push Plate Surface Mount Box

BEA 10BOX45RNDSM 4.5" Round Push Plate Surface Mount Box

(No reviews yet) Write a Review

Model: 10BOX45RNDSM

In Stock (leaves warehouse same day if ordered before 3pm ET)

$39.08
$29.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 10BOX45RNDSM 4.5" Round Push Plate Surface Mount Box

Professional Surface Mount Solution for Electronic Access Control

The BEA 10BOX45RNDSM provides secure surface mounting for 4.5" round stainless steel push plates in electronic access control applications. Constructed from thick ABS plastic, this mounting box ensures reliable installation while minimizing vandalism through its recessed push plate design. Compatible with a variety of transmitters for door activation systems.

Professional Features & Benefits

  • Precise Fit Design: Engineered specifically for 4-1/2" round stainless push plates for secure, professional installation.
  • Vandal-Resistant Construction: Push plate recesses into the box design, minimizing exposure to vandalism and tampering.
  • Durable ABS Construction: Thick ABS plastic material provides long-lasting durability for commercial access control applications.
  • Versatile Compatibility: Accommodates push plates and a variety of transmitters for flexible door activation configurations.
  • Weather Protection Options: Optional weather rings available to provide enhanced weather protection for outdoor installations.
  • Professional Installation: Surface mount design allows for clean, secure installation on various wall surfaces.

Technical Specifications

  • Application: Surface mount or flush mount enclosure for push plates and touchless actuators
  • Available Sizes: Single gang: 2.75 x 4.5 in | Double gang: 4.5 x 4.5 in | 4.5 in square | 4.75 in square | 6 in round | 4.5 in round | Jamb (surface): 1.5 x 4.75 in | Jamb (hardwired): 1.75 x 4.5 in
  • Compatibility: Compatible with PBR, PBR45, PBS, PBS45, PBS6, PBJ, PBO24, PBDGP1 and Magic Switch series push plates
  • Material: Steel / ABS Plastic

Installation & Operation

This mounting box is designed for use with compatible 4.5" round push plates and electronic access control transmitters. Refer to the parent device installation instructions and manufacturer documentation for proper integration. Ensure compatibility with existing hardware before installation.

Professional Applications

  • Commercial Building Access Control Systems
  • Healthcare Facility Entry Points
  • Educational Institution Security Systems
  • Retail Store Access Management
  • Industrial Facility Entry Control
  • Multi-Tenant Residential Access Points
  • Government and Municipal Building Security

Why Choose BEA Quality?

BEA electronic access control components deliver professional-grade reliability with thick ABS plastic construction designed for demanding commercial applications. The vandal-resistant recessed design and optional weather protection accessories ensure dependable performance in various installation environments where secure access control is essential.

Manufacturer Resources

BEA Product Catalog

Product Specs

Product Type:
Mounting Box
Subcategory:
Parts and Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Dimension:
4.5" Round
Product Substrate:
ABS Plastic
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA 10BOX45RNDSM – Frequently Asked Questions

1) What size push plate does the BEA 10BOX45RNDSM surface mount box take?
The 10BOX45RNDSM is built for 4-1/2 inch round push plates, and only that size. If the plate on your job is a 4.5 x 4.5 square, a 4.75 inch square, a 6 inch round, or a single-gang 2.75 x 4.5, you need the box in that shape instead. BEA makes the enclosure in all of those, plus a 1.5 x 4.75 surface jamb and a 1.75 x 4.5 hardwired jamb.
2) Which BEA push plates fit the 10BOX45RNDSM round mount box?
The box family is listed as compatible with the PBR, PBR45, PBS, PBS45, PBS6, PBJ, PBO24, PBDGP1 and Magic Switch series push plates. For this 4.5 inch round enclosure specifically, match a round 4-1/2 inch plate out of that group; the square and jamb-format plates go in their own box sizes.
3) Can I surface mount a BEA push plate on a block or masonry wall instead of cutting in a back box?
That is exactly what this enclosure is for. Rather than coring a box into the wall, the 10BOX45RNDSM mounts on the face of the surface and the actuator lives inside it, so you can put a plate on concrete, block, tile, or a glass surround where you cannot get behind the wall. The same BEA enclosure line is used for flush mount applications too, so if the wall does have a cavity you are not locked into surface work.
4) Will a wireless transmitter fit inside the BEA 4.5 inch round mount box, or is it only for hardwired plates?
Both. The enclosure is specified for push plates and touchless actuators, and it accommodates a variety of transmitters for door activation, so a wireless plate with its transmitter behind it goes in the same box a hardwired plate does. Note that BEA also lists dedicated jamb boxes split by wiring method, a 1.5 x 4.75 surface jamb and a 1.75 x 4.5 hardwired jamb, if the actuator is going on the frame rather than the wall.
5) Is a plastic push plate box durable enough for a high traffic commercial entrance?
The 10BOX45RNDSM is thick ABS plastic and is rated for commercial use, not residential. Its case for abuse resistance is geometry as much as material: the push plate recesses down into the box rather than standing proud of the wall, which cuts the exposed edge someone can pry or hit. On a school or hospital entry that is the failure point that matters more than the shell material.
6) Can the BEA round surface mount push plate box be used outside?
Outdoor installs are handled with an optional weather ring, which BEA offers as an accessory to add weather protection to the enclosure. The box itself is ABS, so it will not rust the way a painted steel back box does on an exterior wall, but for a plate exposed to rain plan on ordering the weather ring with it.
7) Do I need a mounting box at all for a BEA push plate, or does the plate mount straight to the wall?
A back box is only required when there is nowhere to put the actuator. A plate going over an existing electrical box in a stud wall does not need one. You need an enclosure like the 10BOX45RNDSM when the wall is solid, when the run is surface conduit, or when you want the plate recessed for tamper resistance instead of sitting flat on the finish. Size the box to the plate shape, not the other way around.
8) I am standardizing automatic door actuators across a building. Can I use one box size for all of them?
Not unless every plate is the same shape. The enclosure is made in eight formats, single gang 2.75 x 4.5, double gang 4.5 x 4.5, 4.5 inch square, 4.75 inch square, 6 inch round, 4.5 inch round, surface jamb 1.5 x 4.75, and hardwired jamb 1.75 x 4.5. Standardizing works best from the plate down: pick one plate for wall locations and one for jambs, then order the matching box for each. The 10BOX45RNDSM is the one that pairs with the 4-1/2 inch round.
9) Does the BEA 10BOX45RNDSM box come with the push plate?
No. The 10BOX45RNDSM is the enclosure only. The actuator, whether that is a hardwired stainless push plate or a touchless plate with a transmitter, is ordered separately and drops into the box. Budget for the plate, the box, and a weather ring if the opening is exterior.
How fast can I get the BEA 10BOX45RNDSM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA 10BOX45RNDSM come with a warranty?
Absolutely. The BEA 10BOX45RNDSM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA 10BOX45RNDSM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA 10BOX45RNDSM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!