BEA 10ICA IXIO-DT1 Flush Mount...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$184.62
$132.91
BEA BEA 10ICA - Flush Mounted Ceiling Adapter for the IXIO-DT1 10ICA

BEA 10ICA IXIO-DT1 Flush Mounted Ceiling Adapter

(No reviews yet) Write a Review

Model: BEA-10ICA

In Stock (leaves warehouse same day if ordered before 3pm ET)

$184.62
$132.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 10ICA IXIO-DT1 Flush Mounted Ceiling Adapter

Professional Ceiling Mounting Solution for IXIO-DT1 Systems

The BEA 10ICA is a white flush mounted ceiling adapter specifically designed for the IXIO-DT1 electronic access control system. This professional-grade mounting accessory provides a clean, integrated installation solution for ceiling-mounted applications. The flush design ensures seamless integration with standard ceiling systems while maintaining the aesthetic appeal of commercial environments.

Professional Features & Benefits

  • IXIO-DT1 Series Compatibility: Specifically engineered for use with IXIO-DT1 systems for guaranteed fit and performance.
  • Flush Mounting Design: White finish provides clean, professional appearance that integrates seamlessly with standard ceiling installations.
  • Commercial-Grade Construction: Built for demanding commercial applications where reliable mounting solutions are essential.
  • Electronic Access Control Integration: Designed to support electronic access control functionality while maintaining clean aesthetics.
  • Professional Installation: Engineered for straightforward installation in commercial ceiling systems.

Technical Specifications

  • Technology: Active Infrared
  • Detection Mode: Presence
  • Spot Size: 2 in x 2 in
  • Max. Number of Spots: 24 per curtain
  • Max. Number of Curtains: 2
  • Output (Electro-mechanical relay): Potential and polarity free | Max. Contact Current: 1 A | Max. Contact Voltage: 30 VDC | Hold Time: 0.5 s - 9 s
  • Output (Solid-state relay): Potential and polarity free | Max. Contact Current: 400 mA | Max. Contact Voltage: 42 VDC | Hold Time: 0.3 s - 1 s
  • Test Input: Sensitivity: Low < 1 V; High > 10 V (max. 30 V) | Response time: typical < 5 ms
  • Supply Voltage: 12 - 24 VAC +/-10%; 12 - 30 VDC +/-10% (SELV compatible power supplies only)
  • Power Consumption: < 2.5 W
  • Mounting Height: 78 in - 138 in (6.5 ft - 11.5 ft)
  • Temperature Range: -13 deg. F - 131 deg. F; 0 - 95% relative humidity, non-condensing
  • Degree of Protection: IP54
  • Cable Length: 120 in (10 ft) (Pedestrian) | 360 in (30 ft) (Industrial)
  • Applicable Directives: R&TTE 1999/5/EC; EMC 2004/108/EC; MD 2006/42/EC; RoHS 2002/95/EC

Installation & Operation

This ceiling adapter is designed for use with compatible IXIO-DT1 electronic access control systems. Refer to the parent device installation instructions and manufacturer documentation for proper integration. Ensure compatibility with existing hardware before installation.

Professional Applications

  • Commercial Building Access Control Systems
  • Office Building Security Integration
  • Healthcare Facility Access Points
  • Educational Institution Security Systems
  • Retail Establishment Access Control
  • Industrial Facility Monitoring
  • Government and Municipal Buildings

Why Choose BEA Quality?

BEA electronic access control accessories deliver professional-grade reliability with commercial-grade construction designed for demanding applications. The 10ICA ceiling adapter provides the clean, integrated mounting solution required for professional IXIO-DT1 installations. Engineered for commercial environments where dependable performance and aesthetic integration are essential.

Product Specs

Product Type:
Ceiling Adapter
Subcategory:
Parts and Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Series:
IXIO-DT1
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA BEA-10ICA – Frequently Asked Questions

1) Does the BEA 10ICA include the IXIO-DT1 sensor, or is it just the ceiling mount?
The 10ICA is the flush mount ceiling adapter only. It is the white housing that lets an IXIO-DT1 sit flush in a ceiling; the sensor head itself is ordered separately. If you are replacing a failed sensor, the adapter is not the part you need. If you are moving an existing IXIO-DT1 from a header mount to a flush ceiling installation, this is.
2) Will the 10ICA ceiling adapter fit any BEA sensor, or only the IXIO-DT1?
IXIO-DT1 only. The 10ICA is built around that sensor's body and mounting pattern, so a different BEA head will not seat in it. Confirm the sensor on the job is an IXIO-DT1 before ordering the adapter.
3) How high can the ceiling be for an IXIO-DT1 flush ceiling installation?
Mounting height for the IXIO-DT1 runs 78 to 138 inches, or 6.5 to 11.5 feet. That range decides whether a flush ceiling mount works at all in your space. A lobby or atrium ceiling above 11.5 feet puts the sensor out of its rated height, and you would be looking at a header or wall mount instead of the 10ICA adapter.
4) What power supply does an IXIO-DT1 need at a ceiling mounted door?
12 to 24 VAC or 12 to 30 VDC, both plus or minus 10 percent, and SELV compatible supplies only. Draw is under 2.5 W, so a small door controller transformer carries it. Run the power to the ceiling location before the adapter goes in; there is no way to get a cable to a flush mounted head after the ceiling is closed up.
5) Can a ceiling mounted IXIO-DT1 switch my automatic operator directly, or do I need an interface?
Two relay outputs are available, both potential and polarity free. The electro-mechanical relay handles up to 1 A at 30 VDC with a hold time of 0.5 to 9 seconds. The solid state relay is rated 400 mA at 42 VDC with a 0.3 to 1 second hold. Most low voltage operator activation inputs sit well inside those limits, so it wires straight in. Anything switching more current than that needs an interposing relay.
6) Is a flush ceiling mounted IXIO-DT1 suitable for a parking garage or unheated vestibule?
Rated IP54 and good from -13 to 131 degrees F at 0 to 95 percent relative humidity, non-condensing. That covers an unheated vestibule, a loading dock, or a covered garage entry. IP54 is dust protected and splash resistant, not sealed, so a location taking direct driven rain or washdown is outside what it is built for.
7) How much floor area does a ceiling mounted IXIO-DT1 actually cover?
Detection is active infrared presence, projected as 2 in x 2 in spots, up to 24 spots per curtain and a maximum of two curtains. The coverage you get on the floor depends on how high the head is mounted within the 78 to 138 inch range, since the spot pattern spreads with height. Two curtains lets you set a separate safety zone and activation zone at the same opening.
8) How much cable comes with the IXIO-DT1 and will it reach my controller?
Cable length is 120 inches (10 feet) on the pedestrian version and 360 inches (30 feet) on the industrial version. Above a flush ceiling mount, 10 feet gets consumed fast between the head, the plenum run and the header. Measure the run from the ceiling position to the control box before you pick which version to order.
9) Is the BEA 10ICA white adapter meant for commercial buildings or residential doors?
Commercial. The white flush adapter is intended to sit into a standard commercial ceiling so the sensor reads as part of the ceiling rather than a surface box, which is why it turns up in office lobbies, hospitals, schools and retail entrances where the entry is on show.
10) Can I adjust how long the door stays activated after someone is detected?
Hold time is adjustable at the sensor. On the electro-mechanical relay output it sets anywhere from 0.5 to 9 seconds, which is the one to use where you want a longer dwell for a slow moving crowd or a wheelchair user clearing the opening. The solid state output is quicker but far shorter, 0.3 to 1 second.
11) Does the IXIO-DT1 have a test input for a self-check on a monitored entrance?
Yes, there is a test input. Low is under 1 V, high is above 10 V with a 30 V maximum, and typical response time is under 5 ms. That is what lets an operator or controller pulse the sensor and confirm it is still detecting, which matters on monitored automatic entrances where a failed sensor has to be caught.
How fast can I get the BEA BEA-10ICA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA BEA-10ICA come with a warranty?
Absolutely. The BEA BEA-10ICA is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA BEA-10ICA?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA BEA-10ICA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!