BEA 10IXIODT1 IXIO-DT1 Motion ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$724.72
$301.18
BEA 10IXIODT1 Motion and Presence Sensor for Automatic Sliding Doors – front three-quarter view, dark gray housing

BEA 10IXIODT1 IXIO-DT1 Motion & Presence Sensor for Automatic Sliding Doors

(No reviews yet) Write a Review

Model: BEA-10IXIODT1
From the IXIO-DT1 Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$724.72
$301.18
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA IXIO-DT1 Dual Technology Motion and Presence Sensor with Ten Microwave Sensitivity Settings

Advanced Radar and Infrared Detection for Automatic Sliding Doors

The BEA IXIO-DT1 combines microwave activation and infrared presence detection technology to deliver comprehensive motion and presence sensing for automatic sliding door applications. This dual technology sensor features ten microwave activation sensitivity settings and three infrared safety immunity settings, with the ability to distinguish between approaching and departing traffic. ANSI compliant with FCC certification and IP54 rating, the IXIO-DT1 ensures reliable performance in commercial environments.

Professional Features & Benefits

  • Dual Technology Detection: Combines radar and active infrared technologies for enhanced accuracy and reduced false activations in demanding environments.
  • Advanced Sensitivity Control: Ten microwave activation sensitivity settings and three infrared safety immunity settings provide precise tuning for specific applications.
  • Traffic Direction Intelligence: Ability to distinguish between approaching and departing traffic optimizes door operation and energy efficiency.
  • ANSI Compliance: Engineered to meet ANSI standards for automatic door safety and performance requirements.
  • Professional Certifications: FCC certified with IP54 rating for reliable operation in commercial and industrial environments.
  • Versatile Applications: Suitable for sliding doors, industrial doors, vehicle gate detection, and off-door automation systems.
  • User-Friendly Configuration: Highly flexible adjustment options ensure optimal performance across diverse installation requirements.

Technical Specifications

  • Technology: Microwave Doppler Radar + Active Infrared (dual technology)
  • Detection Mode: Motion (microwave) + Presence (infrared)
  • Transmitter Frequency: 24.150 GHz (microwave)
  • Transmitter Radiated Power: < 20 dBm EIRP (microwave)
  • Transmitter Power Density: < 5 mW / cm2 (microwave)
  • Spot Size: 2 in x 2 in (infrared)
  • Max. Number of Spots: 24 per curtain (infrared)
  • Max. Number of Curtains: 2 (infrared)
  • Output (Electro-mechanical relay): Potential and polarity free | Max. Contact Voltage: 30 VDC | Max. Contact Current: 1 A | Hold Time (microwave): 0.5 s - 9 s
  • Output (Solid-state relay): Potential and polarity free | Max. Contact Voltage: 42 VDC | Max. Contact Current: 400 mA | Hold Time (infrared): 0.3 s - 1 s
  • Test Input: Sensitivity: Low < 1 V; High > 10 V (max. 30 V) | Response time: typical < 5 ms
  • Supply Voltage: 12 - 24 VAC +/-10%; 12 - 30 VDC +/-10% (SELV compatible power supplies only)
  • Power Consumption: < 2.5 W
  • Temperature Range: -13 deg. F - 131 deg. F; 0 - 95% relative humidity, non-condensing
  • Mounting Height: 78 in - 138 in (6.5 ft - 11.5 ft)
  • Degree of Protection: IP54
  • Applicable Directives: R&TTE 1999/5/EC; EMC 2004/108/EC; MD 2006/42/EC; RoHS 2002/95/EC
  • Dimensions: 10.6 in (W) x 2.27 in (H) x 2.25 in (D)
  • Cable Length: 120 in (10 ft) (Pedestrian) | 360 in (30 ft) (Industrial)

Installation & Operation

  1. Verify electrical requirements match available power supply and confirm current capacity before proceeding with installation.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the sensor in the specified location ensuring adequate clearance for detection zones, wiring access, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure sensitivity settings including microwave activation levels and infrared safety immunity settings per application requirements and traffic patterns.
  6. Restore power and test all functions including motion detection, presence sensing, traffic direction recognition, and integration with automatic door systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Automatic Door Systems
  • Retail Store Entry and Exit Points
  • Healthcare Facility Access Control
  • Industrial Door Automation
  • Vehicle Gate Detection Systems
  • Multi-Tenant Building Access Points
  • Energy-Efficient Door Control Systems

Why Choose BEA Quality?

BEA IXIO-DT1 sensors deliver professional-grade reliability with dual technology detection and comprehensive certification including FCC approval and IP54 rating. The advanced sensitivity control and traffic direction intelligence ensure optimal performance in demanding commercial applications. Engineered for convenience, safety, and energy efficiency where dependable automatic door operation is essential.

Product Specs

Product Type:
Motion and Presence Sensor
Series:
IXIO-DT1
Subcategory:
Sensors, Switches, Relays and Timers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Technology:
Radar & Active Infrared
Collection:
IXIO-DT1
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA BEA-10IXIODT1 – Frequently Asked Questions

1) Does the BEA IXIO-DT1 handle both door activation and safety presence, or do I need a second sensor?
Both, in one head. The microwave doppler radar side does activation (it sees motion approaching the opening) and the active infrared side does presence, holding the door when someone is standing still in the threshold. The infrared works as up to 2 curtains with a maximum of 24 spots per curtain, each spot 2 in x 2 in. That is what lets one unit cover the approach and the door line on a sliding entrance instead of running a separate activation sensor and a separate safety beam.
2) What voltage does the BEA IXIO-DT1 sliding door sensor run on, and can I power it from the door operator?
Supply is 12 to 24 VAC +/-10 percent or 12 to 30 VDC +/-10 percent, from SELV compatible power supplies only. Draw is under 2.5 W, so the 24 V accessory output on a typical slide operator carries it without a separate transformer, as long as you add up everything else already hanging on that output. If your operator only offers a line voltage or non-SELV supply, don't feed it directly.
3) Will the BEA IXIO-DT1 outputs interface with my existing automatic door operator?
It gives you two output types, both potential and polarity free, so they drop into most operator input terminals without worrying about common polarity. The electro-mechanical relay is rated to 30 VDC max contact voltage and 1 A max contact current. The solid-state relay is rated to 42 VDC max and 400 mA max. Compare those against what your controller switches: a dry contact input on a low voltage operator is well inside both, but do not put either output in line with a line voltage load.
4) My automatic door keeps opening for people walking past it. Can the BEA IXIO-DT1 stop that?
That's the case this sensor is built for. It distinguishes between approaching and departing traffic, so someone crossing in front of the entrance or walking away from it doesn't cycle the door. On top of that there are ten microwave activation sensitivity settings to tighten or widen the activation field, and three infrared safety immunity settings if the presence side is picking up floor shine, mats, or moving shadows. Cross traffic in a mall concourse or a sidewalk running past a storefront is the usual reason a door cycles all day and burns conditioned air.
5) Is the IXIO-DT1 the right sensor for a swing door, or only for sliding doors?
The IXIO-DT1 is specified for automatic sliding door applications, and BEA also lists it for industrial doors, vehicle gate detection, and off-door automation. A swing door is a different detection problem, the door leaf sweeps through the sensor's own field, so that application calls for a sensor specified for swing doors rather than this one. For single slide, dual slide, industrial roll-up, and gate work, this is the correct type.
6) How long does the door stay open after the BEA IXIO-DT1 detects someone?
Hold time on the microwave activation side is adjustable from 0.5 s to 9 s, which is what you set to suit traffic, short for a busy retail entrance, longer for a healthcare entrance where people move slowly or push carts. The infrared presence side has its own hold time of 0.3 s to 1 s, which is a safety hold rather than a dwell timer. Note that the operator's own hold-open timing stacks on top of this.
7) Can the BEA IXIO-DT1 be used on an exterior entrance or an unheated vestibule?
Rated IP54 with an operating range of -13 deg. F to 131 deg. F and 0 to 95 percent relative humidity, non-condensing. That covers a header-mounted position on an exterior storefront entrance, a loading dock, or a gate, including northern winters. IP54 is dust protected and protected against water splashing from any direction, so it is not a submersion or pressure-wash rating, keep it out of the direct path of a wash-down wand.
8) How much cable comes on the BEA 10IXIODT1, and will it reach my controller?
Two cable lengths are supplied depending on the version: 120 in (10 ft) for the pedestrian application and 360 in (30 ft) for the industrial one. Ten feet gets you from a header-mounted sensor down into the operator header on a standard storefront slide. On an industrial door or a gate, where the controller sits in a cabinet away from the opening, the 30 ft lead is what covers the run.
9) Does the BEA IXIO-DT1 support a monitored test input from the door controller?
There's a dedicated test input so the door controller can verify the sensor before each cycle. It reads low below 1 V and high above 10 V, with 30 V maximum, and typical response time is under 5 ms. That is the connection you use when the operator is set up to self-test its safety sensor on every activation, common on entrances maintained to automatic door safety requirements. The IXIO-DT1 is stated as ANSI compliant and FCC certified.
10) What radar frequency does the BEA IXIO-DT1 transmit on, and will it interfere with other sensors on the same entrance?
Transmitter frequency is 24.150 GHz with radiated power under 20 dBm EIRP and power density under 5 mW / cm2, and the unit is FCC certified. That is the standard doppler band for door sensors, so an opposing sensor on the other side of a dual slide is on the same band, which is why the activation sensitivity is adjustable across ten settings, you turn the fields down so the two heads are not reaching into each other's zones. The low radiated power also matters if a facilities group is asking about RF near a sensitive area.
11) Is the BEA IXIO-DT1 a commercial sensor, and is it the same unit across a fleet of entrances?
It's a commercial grade unit, and the IXIO-DT1 ships as a single model, 10IXIODT1, so there is no configuration to match when you standardize across a building or a portfolio. Every head is the same part and the differences between openings are handled in the adjustments: ten microwave activation sensitivity settings, three infrared safety immunity settings, and hold time. For a property manager keeping spares on the shelf, that means one part number covers every sliding entrance running this sensor.
How fast can I get the BEA BEA-10IXIODT1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA BEA-10IXIODT1 come with a warranty?
Absolutely. The BEA BEA-10IXIODT1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA BEA-10IXIODT1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA BEA-10IXIODT1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Videos

!