BEA 10MS51W-DKIT Touchless Dou...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$996.75
$638.00
BEA BEA 10MS51W-DKIT - Touchless Double Gang Battery-Powered Actuator Kit, (2) 10MS51W-D "Wave To Open" Hand Logo Faceplates with Surface-Mount Boxes and (1) 900 MHz Receiver Module 10MS51W-DKIT

BEA 10MS51W-DKIT Touchless Double Gang Battery-Powered Actuator Kit with 900 MHz Wireless Receiver

(No reviews yet) Write a Review

Model: BEA-10MS51W-DKIT

In Stock (leaves warehouse same day if ordered before 3pm ET)

$996.75
$638.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA MS51W Series Battery-Powered Touchless Actuator Kit with 900 MHz Wireless Transmitter

Professional Touchless Door Activation Solution

The BEA MS51W Series is a long-lasting battery-powered, active infrared touchless actuator with a built-in 900 MHz wireless transmitter that reduces wiring requirements and provides flexible mounting options. This professional-grade solution delivers three years of uninterrupted operation across a range of applications and environments, with LED alerts indicating battery status for easy maintenance. The MS51W offers reliable operation with key features engineered to ensure performance in challenging conditions, including harsh lighting and cold weather climates.

Professional Features & Benefits

  • Extended Battery Life: Three years of uninterrupted operation reduces maintenance requirements and ensures consistent performance in commercial applications.
  • Built-In 900 MHz Wireless Transmitter: Eliminates complex wiring requirements and provides flexible installation options for various door configurations.
  • Active Infrared Technology: Provides reliable touchless activation with superior performance in challenging environmental conditions.
  • LED Battery Status Indicators: Visual alerts indicate battery status for proactive maintenance scheduling and system reliability.
  • Environmental Immunity Modes: Selectable immunity settings enhance performance and mitigate environmental disturbances such as rain, water spray, and snow.
  • Cold Weather Performance: Engineered to maintain reliable operation in harsh lighting and cold weather climates for year-round dependability.
  • Germ-Free Operation: Touchless activation eliminates physical contact for safer interactions, improved traffic flow, and enhanced accessibility compliance.
  • Versatile Design Options: Available in a variety of popular design options, including accessibility artwork for ADA compliance applications.

Technical Specifications

  • Technology: Microwave Doppler Radar
  • Detection Mode: Motion (bidirectional), Toggle or Timed Mode
  • Sensing Zone: 2 in - 24 in (adjustable)
  • Hold Time: 1 s - 30 s
  • Alert Settings (Audible): Silent Mode or Signal Mode
  • Alert Settings (Visual): Blue (Standby); Green (Activation)
  • Supply Voltage: 12 - 24 VAC / VDC or 5 VDC
  • Current Consumption: < 2.8 W
  • Temperature Range: -22 deg. F - 158 deg. F
  • Enclosure Rating: NEMA 4 / IP65
  • Relay: 1-Form C Solid State Relay; 1 A; 30 VAC / VDC (max)
  • Dimensions (Single Gang): 2.75 in (W) x 4.5 in (H) x 0.98 in (D)
  • Dimensions (Double Gang): 4.5 in (W) x 4.5 in (H) x 0.98 in (D)
  • Dimensions (Jamb): 1.68 in (W) x 4.5 in (H) x 0.98 in (D)
  • Wire Harness Length: 12 in
  • Material: Stainless Steel (faceplate) / ABS (center)

Installation & Operation

  1. Verify electrical requirements and confirm 900 MHz wireless system compatibility before proceeding with installation.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for sensor operation, battery access, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Configure wireless transmitter settings per system requirements.
  5. Configure operational settings including environmental immunity modes per application requirements and site conditions.
  6. Restore power and test all functions including touchless activation, wireless transmission, LED status indicators, and integration with connected access control systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Access Control Systems
  • Healthcare Facility Touchless Entry
  • Educational Institution Safety Systems
  • Retail Establishment Access Points
  • Industrial Facility Entry Control
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose BEA Quality?

BEA touchless actuator products deliver professional-grade reliability with active infrared technology engineered for three years of uninterrupted battery operation. The MS51W Series features environmental immunity modes and cold weather performance capabilities for demanding commercial applications where dependable touchless access control is essential. LED status indicators and wireless transmission technology provide enhanced maintenance visibility and installation flexibility.

Manufacturer Resources

BEA Product Catalog

Product Specs

Product Type:
Touchless Actuator
Series:
MS51W Series
Subcategory:
Sensors, Switches, Relays and Timers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA BEA-10MS51W-DKIT – Frequently Asked Questions

1) Will the BEA MS51W double gang actuator fit a standard double gang box or surface-mount box?
The MS51W in the double gang size measures 4.5 in (W) x 4.5 in (H) x 0.98 in (D), so it covers a standard two-gang opening and stands just under an inch off the wall. The same series is also built in a single gang plate at 2.75 in (W) x 4.5 in (H) x 0.98 in (D) and a jamb plate at 1.68 in (W) x 4.5 in (H) x 0.98 in (D), so if you are mounting on a narrow mullion or door jamb rather than a wall, the jamb size is the one to order.
2) Do I have to run wire from the wave plate back to the door operator?
No. The MS51W actuator runs on battery and carries a built-in 900 MHz wireless transmitter, so the activation signal goes to the receiver over the air instead of through conduit. That is the reason to pick this one over a hardwired plate: you can put it across a lobby, on a glass wall, or on a jamb where fishing wire back to the operator is the whole cost of the job. You still need the 900 MHz receiver side at the operator, and BEA calls for confirming 900 MHz system compatibility before you install.
3) Can a BEA MS51W touchless actuator be mounted outdoors or in an unheated entry vestibule?
Yes. The enclosure is rated NEMA 4 / IP65 and the operating range runs -22 deg. F to 158 deg. F, so exterior entrances, unheated vestibules, and washdown-adjacent areas are within spec. It also has selectable environmental immunity modes to keep rain, water spray, and snow from producing false activations, which is the failure people actually see on exterior touchless plates.
4) How close does someone have to get for the wave plate to trigger, and can I adjust it?
The sensing zone is adjustable from 2 in out to 24 in. Set it short in a tight corridor where people brush past the plate and you do not want nuisance opens, or set it long at a hospital entry where someone is coming through with a cart or a wheelchair and cannot get close. Hold time is adjustable too, 1 s to 30 s, which is what you tune so the door stays open long enough for the traffic actually using it.
5) How often will I be changing batteries in a BEA MS51W wave plate?
Three years of operation per battery, and the plate gives you an LED battery status alert so a maintenance tech can see it is getting low on a walk-through rather than finding out when the door stops opening. For a property manager running a fleet of openings, that puts battery swaps on a scheduled cycle instead of a service call.
6) Will the BEA MS51W relay output work with my existing door operator or access control input?
The output is a 1-Form C solid state relay rated 1 A at 30 VAC / VDC max. That is a dry contact suitable for a low-voltage activation input on a swing door operator or an access control panel. It is not a switch for line voltage or for anything drawing more than an amp, so if you are trying to drive a load directly rather than trigger an operator input, you need an interposing relay.
7) Should I use a wave-to-open touchless plate or a standard push plate on this door?
A push plate is mechanical, needs no power, and never false-triggers, but it means contact with the plate. A touchless actuator like the MS51W removes that contact, which is why it goes in on healthcare entries, restrooms, food service, and public-facing doors where hand contact is the objection. The trade is that you are now maintaining a sensor: batteries every three years, a sensing zone to tune between 2 in and 24 in, and immunity settings for weather on exterior openings. Where the door is interior, low traffic, and nobody objects to touching it, a push plate is the simpler part.
8) Can I set the BEA MS51W to hold a door open rather than just cycle it?
Yes. Detection can be set to bidirectional motion, toggle, or timed mode. Toggle is what you use when you want a wave to latch the door open and a second wave to release it, for a delivery or a move-in. Timed mode holds for the interval you set, 1 s to 30 s. There is also an audible alert choice of silent or signal mode, plus a blue standby / green activation LED, so in a quiet facility you can run it silent and still give users visual feedback.
9) If I hardwire the MS51W instead of running it on battery, what power does it need?
Supply voltage is 12 - 24 VAC / VDC or 5 VDC, drawing under 2.8 W, and a 12 in wire harness comes on the unit for the connection. That means a standard low-voltage transformer or the auxiliary output on most swing door operators will carry it, and the 12 in harness is your working slack, so plan the box location close enough that you are not splicing in an extension outside the enclosure.
10) Is the BEA MS51W faceplate durable enough for a public entrance or a school corridor?
The faceplate is stainless steel with an ABS center section, so the surface taking the abuse in a school corridor or a hospital entry is metal rather than plastic. It is a commercial-duty part, and it is offered in design options including accessibility artwork for ADA compliance applications.
How fast can I get the BEA BEA-10MS51W-DKIT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA BEA-10MS51W-DKIT come with a warranty?
Absolutely. The BEA BEA-10MS51W-DKIT is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA BEA-10MS51W-DKIT?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA BEA-10MS51W-DKIT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!